Hi Saifi,
Xorg 7.4_1 seems having some issues with dbus and hald.
The -- Option "AllowEmptyInput" "false" -- is the must, but dbus and hald can
cause system useless.
On this laptop, I only run dbus and hald once. Then I disabled both of them and
X window works well.
On a couple of Desktop machines (4-core Phenom and Intel P4+506) with GeForce
graphic cards, without
dbus and halt, X Window run fine except no F-key works. Enable and run dbus and
hald, All F-key work,
but output device is almost dead.
Top shows system is completely idle, but typing will not show on any xterm till
the mouse is moving.
For example, run TOP on a xterm, the entire window system has no thing change.
The clock of on the upper right
corner of the "TOP" xterm is stopped (actually is running, but no output to
display). Once mouse is moving,
the clock and top section are updated. Once mouse stops moving, then no thing
is change (no output anywhere).
Similar to the typing. Typing a command will not show on the Xterm still mouse
is moved. About less than 5%
of time, I can type and see the output right way. Without dbus and hald
running, there is no such problem.
Has anyone encountered the same problem?
The other main difference between this xorg.conf and previous on is the
"Module" section.
This xorg.conf, generated by X -configure, has -- Load "dri2" where previous one has -- Load "GLcore".
I am not sure if this is an issue.
-Jin
Saifi Khan wrote:
On Sun, 17 May 2009, Jin Guojun[VFF] wrote:
When installed FreeBSD 7.2 release with xorg-7.4.1, the X server does not work
on
HP Pavilion dv5210us laptop due to the key board and mouse are disabled
somehow.
Some Hot keys (Ctrl-Altr-F#) are working but mouse is not movable and cannot
type in a Xterm.
(**) ModulePath set to "/usr/local/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse'
will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
Does anyone hasve an idea how to fix this problem?
Both Xorg.0.log and xorg.conf are attached.
Thanks,
-Jin
Hi Jin:
You need to add an additional line to your 'ServerLayout' or
'ServerFlags'.
Option "AllowEmptyInput" "false"
Please see the sample xorg.conf file that i'm running on my
Compaq laptop.
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
# InputDevice "Mouse1" "SendCoreEvents"
EndSection
Section "ServerFlags"
Option "DontZap" "Off"
Option "AllowEmptyInput" "false"
Option "AllowEmptyInput" "false"
# Option "AllowMouseOpenFail" "on"
EndSection
Section "Files"
FontPath "unix/:7101"
FontPath "/usr/local/lib/X11/fonts/100dpi/"
FontPath "/usr/local/lib/X11/fonts/75dpi/"
FontPath "/usr/local/lib/X11/fonts/OTF"
FontPath "/usr/local/lib/X11/fonts/TTF/"
FontPath "/usr/local/lib/X11/fonts/Type1/"
FontPath "/usr/local/lib/X11/fonts/URW/"
FontPath "/usr/local/lib/X11/fonts/bistream-vera/"
FontPath "/usr/local/lib/X11/fonts/cyrillic/"
FontPath "/usr/local/lib/X11/fonts/dejavu/"
FontPath "/usr/local/lib/X11/fonts/freefont/"
FontPath "/usr/local/lib/X11/fonts/local/"
FontPath "/usr/local/lib/X11/fonts/misc/"
FontPath "/usr/local/lib/X11/fonts/terminus-font/"
FontPath "/usr/local/lib/X11/fonts/urwfonts-ttf/"
FontPath "/usr/local/lib/X11/fonts/util/"
FontPath "/usr/local/lib/X11/fonts/webfonts/"
FontPath "/usr/local/share/ghostscript/fonts/"
FontPath "/usr/local/lib/X11/fonts/sharefont/"
FontPath "/usr/local/lib/X11/fonts/texcm-ttf/"
FontPath "/usr/local/lib/X11/fonts/local/sgi/"
FontPath "/usr/local/lib/X11/fonts/ppantsfonts/"
ModulePath "/usr/local/lib/xorg/modules"
EndSection
Section "Module"
Load "extmod"
Load "record"
Load "dbe"
Load "glx"
Load "dri"
Load "dri2"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "Protocol" "Standard"
Option "XkbLayout" "us"
Option "XkbModel" "pc104"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "synaptics"
Option "Device" "/dev/sysmouse"
Option "Emulate3Buttons" "on"
Option "SHMConfig" "on"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30-62
VertRefresh 50-60
Option "DPMS"
EndSection
Section "Device"
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 945GM/GMS, 943/940GML Express Integrated Graphics
Controller"
BusID "PCI:0:2:0"
Option "FramebufferCompression" "false"
Option "AccelMethod" "XAA"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800" "1024x768" "800x600"
EndSubSection
EndSection
#Section "DRI"
# Group "video"
# Mode 0660
#EndSection
Additionally, it is required that you place the following
configurations in the /etc/rc.conf file
hald_enable="YES"
dbus_enable="YES"
thanks
Saifi.
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
