When the TL-C300 is plugged in after boot, it produces the following console 
report:-

umass1: <RockChip ROCK MP3, class 0/0, rev 2.00/0.00, addr 2> on uhub2
(probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim1:1:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim1:1:0:0): SCSI Status: Check Condition
(probe0:umass-sim1:1:0:0): NOT READY asc:3a,0
(probe0:umass-sim1:1:0:0): Medium not present
(probe0:umass-sim1:1:0:0): Unretryable error
da0 at umass-sim1 bus 1 target 0 lun 0
da0: <Teclast Digital  Player 1.00> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 1900MB (3892224 512 byte sectors: 255H 63S/T 242C)


doesn't look like too big blocksize problem...

but fails to create /dev/da0. Also, when it is plugged in, no other usb devices 
are recognised.

Unplugging produces this:-

umass1: at uhub2 port 2 (addr 2) disconnected
(da0:umass-sim1:1:0:0): Synchronize cache failed, status == 0x39, scsi status 
== 0x0
(da0:umass-sim1:1:0:0): lost device
(da0:umass-sim1:1:0:0): removing device entry
umass1: detached

If it's "Synchronize cache failed" problem, then adding entry in umass.c will fix it, as with my olympus FE-20

But it's rather not main problem. maybe some other quirk?
look at possible quirks
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"

Reply via email to