Fbsd1 said the following on 2009-06-12 05:52:
Bernt Hansson wrote:
Bernt Hansson:
Hello list!


I've got an usb flash disc kingston datatraveler DT150 64GB.
That I put pcbsd on to try, and now I can't seem to get it of the stick.

Tried fdisk -BI /dev/da0, dd if=/dev/zero of=/dev/da0 bs=1m and nothing
seems to work.

Is there a solution to this?


dmesg:

da0 at umass-sim0 bus 0 target 0 lun 0
da0: <USB2.0 Flash Disk 2.50> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 65536MB (134217728 512 byte sectors: 255H 63S/T 8354C)
GEOM_LABEL: Label for provider da0 is iso9660/PCBSD.


Errors when trying fdisk:

fdisk -BI /dev/da0
******* Working on device /dev/da0 *******
fdisk: invalid fdisk partition table found
fdisk: Geom not found: "da0"
fdisk: Failed to write sector zero

umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR

And I also saw this error
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi
status == 0x0

Running:

FreeBSD 7.2-STABLE #0: Tue Jun  9 17:04:38 CEST 2009
:/usr/obj/usr/src/sys/GENERIC  amd64

Try plugging it into a windows XP system and run format on it.

Already done that. No go.
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"

Reply via email to