[ Adding usb@ and keeping long context for that purpose ]

On Saturday 18 July 2009 08:29:32 Andrey Shuvikov wrote:
> On Sat, Jul 18, 2009 at 2:02 AM, Mel
>
> Flynn<mel.flynn+fbsd.questi...@mailing.thruhere.net> wrote:
> > On Friday 17 July 2009 18:59:49 Andrey Shuvikov wrote:
> >> I'm trying to configure X and according to the manual enabled DBUS and
> >> HALD. But when hald is starting up I get kernel panic:
> >>
> >> kmem_malloc: entry not found or misaligned
> >>
> >> Does anyone know what could be wrong? I have memory dump if it can
> >> help but it's big (173M).
> >
> > If you have a file /var/crash/vmcore.0, you will want to run the
> > following command:
> > kgdb /boot/kernel/kernel /var/crash/vmcore.0
> > Then type bt at the prompt and paste output here.
> >
> > More info:
> > <http://www.freebsd.org/doc/en_US.ISO8859-1/books/developers-handbook/ker
> >neldebug.html>
> >
> > uname -a and dmesg output also help in diagnosing this problem.
> > --
> > Mel
>
> The uname output is:
>
> FreeBSD foxtrot.home 7.2-RELEASE FreeBSD 7.2-RELEASE #0: Fri May  1
> 08:49:13 UTC 2009
> r...@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC  i386
>
> The kgdb output:
>
> GNU gdb 6.1.1 [FreeBSD]
> Copyright 2004 Free Software Foundation, Inc.
> GDB is free software, covered by the GNU General Public License, and you
> are welcome to change it and/or distribute copies of it under certain
> conditions. Type "show copying" to see the conditions.
> There is absolutely no warranty for GDB.  Type "show warranty" for details.
> This GDB was configured as "i386-marcel-freebsd"...
>
> Unread portion of the kernel message buffer:
> panic: kmem_malloc: entry not found or misaligned
> cpuid = 0
> Uptime: 52s
> Physical memory: 2034 MB
> Dumping 176 MB: 161 145 129 113 97 81 65 49 33 17 1
>
> Reading symbols from /boot/kernel/linux.ko...Reading symbols from
> /boot/kernel/linux.ko.symbols...done.
> done.
> Loaded symbols for /boot/kernel/linux.ko
> #0  doadump () at pcpu.h:196
> 196   pcpu.h: No such file or directory.
>       in pcpu.h
> (kgdb) bt
> #0  doadump () at pcpu.h:196
> #1  0xc07e25a7 in boot (howto=260) at /usr/src/sys/kern/kern_shutdown.c:418
> #2  0xc07e2879 in panic (fmt=Variable "fmt" is not available.
> ) at /usr/src/sys/kern/kern_shutdown.c:574
> #3  0xc0a1cdc0 in kmem_malloc (map=0xc147108c, size=0, flags=2)
>     at /usr/src/sys/vm/vm_kern.c:381
> #4  0xc0a13357 in page_alloc (zone=0x0, bytes=0, pflag=0xe7b6497f "\002",
>     wait=2) at /usr/src/sys/vm/uma_core.c:952
> #5  0xc0a15e20 in uma_large_malloc (size=0, wait=2)
>     at /usr/src/sys/vm/uma_core.c:2706
> #6  0xc07d16f8 in malloc (size=0, mtp=0xc0c46580, flags=2)
                            ^^^^^^
>     at /usr/src/sys/kern/kern_malloc.c:393
> #7  0xc0743044 in uhidopen (dev=0xc5713000, flag=1, mode=8192,
> p=0xc5c6a460) at /usr/src/sys/dev/usb/uhid.c:428
In kgdb can you print the entire softcell as follows:
f 7
p *sc

Hopefully that will provide sufficient information for the usb developers to 
fix this problem.

> #8  0xc07a56a0 in giant_open (dev=0xc5713000, oflags=1, devtype=8192,
>     td=0xc5c6a460) at /usr/src/sys/kern/kern_conf.c:332
> #9  0xc076e1fc in devfs_open (ap=0xe7b64a88)
>     at /usr/src/sys/fs/devfs/devfs_vnops.c:908
> #10 0xc0af88d2 in VOP_OPEN_APV (vop=0xc0c47ee0, a=0xe7b64a88)
>     at vnode_if.c:371
> #11 0xc0870829 in vn_open_cred (ndp=0xe7b64b7c, flagp=0xe7b64c78, cmode=0,
>     cred=0xc5470100, fp=0xc5b57da8) at vnode_if.h:199
> #12 0xc0870973 in vn_open (ndp=0xe7b64b7c, flagp=0xe7b64c78, cmode=0,
>     fp=0xc5b57da8) at /usr/src/sys/kern/vfs_vnops.c:94
> #13 0xc086e0a3 in kern_open (td=0xc5c6a460,
>     path=0xbfbfe90c <Address 0xbfbfe90c out of bounds>,
>     pathseg=UIO_USERSPACE, flags=1, mode=0)
>     at /usr/src/sys/kern/vfs_syscalls.c:1042
> #14 0xc086e610 in open (td=0xc5c6a460, uap=0xe7b64cfc)
>     at /usr/src/sys/kern/vfs_syscalls.c:1009
> #15 0xc0ae4495 in syscall (frame=0xe7b64d38)
>     at /usr/src/sys/i386/i386/trap.c:1090
> #16 0xc0ac9260 in Xint0x80_syscall ()
>     at /usr/src/sys/i386/i386/exception.s:255
> #17 0x00000033 in ?? ()
> Previous frame inner to this frame (corrupt stack?)
> (kgdb) q
>
> The dmesg:
>
> Copyright (c) 1992-2009 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>       The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 7.2-RELEASE #0: Fri May  1 08:49:13 UTC 2009
>     r...@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz (2999.67-MHz 686-class
> CPU) Origin = "GenuineIntel"  Id = 0x10676  Stepping = 6
>  
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MC
>A,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> Features2=0x8e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PD
>CM,SSE4.1> AMD Features=0x20100000<NX,LM>
>   AMD Features2=0x1<LAHF>
>   Cores per package: 2
> real memory  = 2146893824 (2047 MB)
> avail memory = 2091225088 (1994 MB)
> ACPI APIC Table: <A_M_I_ OEMAPIC >
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> acpi0: <A_M_I_ OEMRSDT> on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> acpi0: reservation of 0, a0000 (3) failed
> acpi0: reservation of 100000, 7ff00000 (3) failed
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
> acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem
> 0xd0000000-0xdfffffff,0xfe8e0000-0xfe8effff irq 16 at device 0.0 on
> pci1
> pci1: <multimedia, HDA> at device 0.1 (no driver attached)
> uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at
> device 26.0 on pci0
> uhci0: [GIANT-LOCKED]
> uhci0: [ITHREAD]
> usb0: <UHCI (generic) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at
> device 26.1 on pci0
> uhci1: [GIANT-LOCKED]
> uhci1: [ITHREAD]
> usb1: <UHCI (generic) USB controller> on uhci1
> usb1: USB revision 1.0
> uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 18 at
> device 26.2 on pci0
> uhci2: [GIANT-LOCKED]
> uhci2: [ITHREAD]
> usb2: <UHCI (generic) USB controller> on uhci2
> usb2: USB revision 1.0
> uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
> uhub2: 2 ports with 2 removable, self powered
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe7ffc00-0xfe7fffff
> irq 18 at device 26.7 on pci0
> ehci0: [GIANT-LOCKED]
> ehci0: [ITHREAD]
> usb3: EHCI version 1.0
> usb3: companion controllers, 2 ports each: usb0 usb1 usb2
> usb3: <EHCI (generic) USB 2.0 controller> on ehci0
> usb3: USB revision 2.0
> uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
> uhub3: 6 ports with 6 removable, self powered
> umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on
> uhub3 pci0: <multimedia, HDA> at device 27.0 (no driver attached)
> pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
> pci4: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
> pci3: <ACPI PCI bus> on pcib3
> atapci0: <Marvell 88SX6121 UDMA133 controller> port
> 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f
> mem 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci3
> atapci0: [ITHREAD]
> ata2: <ATA channel 0> on atapci0
> ata2: [ITHREAD]
> pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
> pci2: <ACPI PCI bus> on pcib4
> ale0: <Atheros AR8121/AR8113/AR8114 PCIe Ethernet> port 0xdc00-0xdc7f
> mem 0xfe9c0000-0xfe9fffff irq 17 at device 0.0 on pci2
> ale0: 960 Tx FIFO, 1024 Rx FIFO
> ale0: Using 1 MSI messages.
> miibus0: <MII bus> on ale0
> atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0
> atphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX,
> auto ale0: Ethernet address: 00:22:15:5a:67:e8
> ale0: [FILTER]
> uhci3: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 23 at
> device 29.0 on pci0
> uhci3: [GIANT-LOCKED]
> uhci3: [ITHREAD]
> usb4: <UHCI (generic) USB controller> on uhci3
> usb4: USB revision 1.0
> uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
> uhub4: 2 ports with 2 removable, self powered
> uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at
> device 29.1 on pci0
> uhci4: [GIANT-LOCKED]
> uhci4: [ITHREAD]
> usb5: <UHCI (generic) USB controller> on uhci4
> usb5: USB revision 1.0
> uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
> uhub5: 2 ports with 2 removable, self powered
> uhci5: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 18 at
> device 29.2 on pci0
> uhci5: [GIANT-LOCKED]
> uhci5: [ITHREAD]
> usb6: <UHCI (generic) USB controller> on uhci5
> usb6: USB revision 1.0
> uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
> uhub6: 2 ports with 2 removable, self powered
> ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe7ff800-0xfe7ffbff
> irq 23 at device 29.7 on pci0
> ehci1: [GIANT-LOCKED]
> ehci1: [ITHREAD]
> usb7: EHCI version 1.0
> usb7: companion controllers, 2 ports each: usb4 usb5 usb6
> usb7: <EHCI (generic) USB 2.0 controller> on ehci1
> usb7: USB revision 2.0
> uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
> uhub7: 6 ports with 6 removable, self powered
> ugen0: <Microsoft Microsoft LifeCam VX-5000, class 239/2, rev
> 2.00/1.00, addr 2> on uhub7
> pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci5: <ACPI PCI bus> on pcib5
> fwohci0: <Lucent FW322/323> mem 0xfebff000-0xfebfffff irq 19 at device
> 3.0 on pci5
> fwohci0: [FILTER]
> fwohci0: OHCI version 1.0 (ROM=1)
> fwohci0: No. of Isochronous channels is 8.
> fwohci0: EUI64 00:1e:8c:00:01:63:47:d0
> fwohci0: Phy 1394a available S400, 2 ports.
> fwohci0: Link S400, max_rec 2048 bytes.
> firewire0: <IEEE1394(FireWire) bus> on fwohci0
> fwe0: <Ethernet over FireWire> on firewire0
> if_fwe0: Fake Ethernet address: 02:1e:8c:63:47:d0
> fwe0: Ethernet address: 02:1e:8c:63:47:d0
> fwip0: <IP over FireWire> on firewire0
> fwip0: Firewire address: 00:1e:8c:00:01:63:47:d0 @ 0xfffe00000000,
> S400, maxrec 2048
> sbp0: <SBP-2/SCSI over FireWire> on firewire0
> dcons_crom0: <dcons configuration ROM> on firewire0
> dcons_crom0: bus_addr 0x12e4000
> fwohci0: Initiate bus reset
> fwohci0: BUS reset
> fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci1: <Intel ICH10 SATA300 controller> port
> 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x940
>0-0x940f irq 19 at device 31.2 on pci0
> atapci1: [ITHREAD]
> ata3: <ATA channel 0> on atapci1
> ata3: [ITHREAD]
> ata4: <ATA channel 1> on atapci1
> ata4: [ITHREAD]
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> atapci2: <Intel ICH10 SATA300 controller> port
> 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa40
>0-0xa40f irq 19 at device 31.5 on pci0
> atapci2: [ITHREAD]
> ata5: <ATA channel 0> on atapci2
> ata5: [ITHREAD]
> ata6: <ATA channel 1> on atapci2
> ata6: [ITHREAD]
> acpi_button0: <Power Button> on acpi0
> fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq
> 2 on acpi0
> fdc0: [FILTER]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
> acpi0 sio0: type 16550A
> sio0: [FILTER]
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: [ITHREAD]
> psm0: model IntelliMouse, device ID 3
> cpu0: <ACPI CPU> on acpi0
> ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] -  EE,
> should be E5 [20070320]
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> cpu1: <ACPI CPU> on acpi0
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 618092006000920
> device_attach: est1 attach returned 6
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> pmtimer0 on isa0
> orm0: <ISA Option ROM> at iomem 0xd0000-0xd27ff pnpid ORM0000 on isa0
> ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
> ata0: [ITHREAD]
> ata1 at port 0x170-0x177,0x376 irq 15 on isa0
> ata1: [ITHREAD]
> ppc0: parallel port not found.
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> uhid0: <Yealink Network Technology Ltd. VOIP USB Phone, class 0/0, rev
> 1.01/0.00, addr 2> on uhub5
> Timecounters tick every 1.000 msec
> firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
> firewire0: bus manager 0 (me)
> acd0: DVDR <PLEXTOR DVDR PX-712A/1.04> at ata2-master UDMA33
> ad6: 152627MB <WDC WD1600JS-00SGB0 20.06C03> at ata3-master SATA300
> ad8: 305245MB <WDC WD3200AAKS-00VYA0 12.01B02> at ata4-master SATA300
> GEOM_LABEL: Label for provider ad6s1 is msdosfs/FREEDOS.
> GEOM_LABEL: Label for provider ad8s1 is ntfs/New Volume.
> GEOM_LABEL: Label for provider ad6s3a is ufsid/4a5a61fa90383ccc.
> GEOM_LABEL: Label for provider ad6s3d is ufsid/4a5a61fc87a6c3a0.
> GEOM_LABEL: Label for provider ad6s3e is ufsid/4a5a61fa5b9a9e33.
> GEOM_LABEL: Label for provider ad6s3f is ufsid/4a5a61fb3ef7459f.
> GEOM_LABEL: Label for provider ad6s3g is ufsid/4a5a61fa4e22975e.
> (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
> (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (probe0:umass-sim0:0:0:0): NOT READY csi:0,aa,55,40 asc:3a,0
> (probe0:umass-sim0:0:0:0): Medium not present
> (probe0:umass-sim0:0:0:0): Unretryable error
> (probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0
> (probe0:umass-sim0:0:0:1): CAM Status: SCSI Status Error
> (probe0:umass-sim0:0:0:1): SCSI Status: Check Condition
> (probe0:umass-sim0:0:0:1): NOT READY csi:0,aa,55,40 asc:3a,0
> (probe0:umass-sim0:0:0:1): Medium not present
> (probe0:umass-sim0:0:0:1): Unretryable error
> (probe0:umass-sim0:0:0:2): TEST UNIT READY. CDB: 0 40 0 0 0 0
> (probe0:umass-sim0:0:0:2): CAM Status: SCSI Status Error
> (probe0:umass-sim0:0:0:2): SCSI Status: Check Condition
> (probe0:umass-sim0:0:0:2): NOT READY csi:0,aa,55,40 asc:3a,0
> (probe0:umass-sim0:0:0:2): Medium not present
> (probe0:umass-sim0:0:0:2): Unretryable error
> (probe0:umass-sim0:0:0:3): TEST UNIT READY. CDB: 0 60 0 0 0 0
> (probe0:umass-sim0:0:0:3): CAM Status: SCSI Status Error
> (probe0:umass-sim0:0:0:3): SCSI Status: Check Condition
> (probe0:umass-sim0:0:0:3): NOT READY csi:0,aa,55,40 asc:3a,0
> (probe0:umass-sim0:0:0:3): Medium not present
> (probe0:umass-sim0:0:0:3): Unretryable error
> SMP: AP CPU #1 Launched!
> da0 at umass-sim0 bus 0 target 0 lun 0
> da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device
> da0: 40.000MB/s transfers
> da0: Attempt to query device size failed: NOT READY, Medium not present
> da1 at umass-sim0 bus 0 target 0 lun 1
> da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device
> da1: 40.000MB/s transfers
> da1: Attempt to query device size failed: NOT READY, Medium not present
> da2 at umass-sim0 bus 0 target 0 lun 2
> da2: <Generic USB xD/SM Reader 1.02> Removable Direct Access SCSI-0 device
> da2: 40.000MB/s transfers
> da2: Attempt to query device size failed: NOT READY, Medium not present
> da3 at umass-sim0 bus 0 target 0 lun 3
> da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device
> da3: 40.000MB/s transfers
> da3: Attempt to query device size failed: NOT READY, Medium not present
> Trying to mount root from ufs:/dev/ad6s3a
> GEOM_LABEL: Label ufsid/4a5a61fa90383ccc removed.
> GEOM_LABEL: Label for provider ad6s3a is ufsid/4a5a61fa90383ccc.
> GEOM_LABEL: Label ufsid/4a5a61fa4e22975e removed.
> GEOM_LABEL: Label for provider ad6s3g is ufsid/4a5a61fa4e22975e.
> GEOM_LABEL: Label ufsid/4a5a61fa5b9a9e33 removed.
> GEOM_LABEL: Label for provider ad6s3e is ufsid/4a5a61fa5b9a9e33.
> GEOM_LABEL: Label ufsid/4a5a61fb3ef7459f removed.
> GEOM_LABEL: Label for provider ad6s3f is ufsid/4a5a61fb3ef7459f.
> GEOM_LABEL: Label ufsid/4a5a61fc87a6c3a0 removed.
> GEOM_LABEL: Label for provider ad6s3d is ufsid/4a5a61fc87a6c3a0.
> GEOM_LABEL: Label ufsid/4a5a61fa90383ccc removed.
> GEOM_LABEL: Label ufsid/4a5a61fa4e22975e removed.
> GEOM_LABEL: Label ufsid/4a5a61fa5b9a9e33 removed.
> GEOM_LABEL: Label ufsid/4a5a61fb3ef7459f removed.
> GEOM_LABEL: Label ufsid/4a5a61fc87a6c3a0 removed.
> GEOM_LABEL: Label msdosfs/FREEDOS removed.
> GEOM_LABEL: Label for provider ad6s1 is msdosfs/FREEDOS.
> GEOM_LABEL: Label msdosfs/FREEDOS removed.
>
> Thanks,
> Andrey

-- 
Mel
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"

Reply via email to