IIRC, 5.0-R has reverse name resolution for sshd (which is _always_ done, because of PAM, I think, no matter what the configuration file say) run chrooted in /var/empty. Well, the problem with that is that, by default (ie, in the absence of any configuration in /var/empty/etc) 127.0.0.1 is searched first, and if you have blackhole enabled (or equivalent firewall rules), it takes a LONG time for it to realize no answer is coming.

Wayne wrote:

Dear FreeBSD,

    I have installed 5.0 into a new Dell.  I have not set up anything
special yet (no firewall, no natd, etc.).

    I can ssh out to the world, but I can't get into the new box from the
gateway FreeBSD box on the same home network.  The gateway box properly
lists the new box in /etc/hosts.  Each box can ping the other by name
and by ip.

    I have tried the OpenSSH that came with the system, and I
installed ssh-3.0 , and the result is the same.  sshd is running
on the new box.

I enabled telnet in inetd.conf, and I get rejected, also.

    Is there a new default connecton protection that I must turn off, or
something?  [/etc/hosts.allow  is the default setting, I see no answer
there.]

- Wayne

--------- example screen output below. The new box is etaq3 ------

[EMAIL PROTECTED]:/home/wayne>ssh etaq3
ssh_exchange_identification: read: Connection reset by peer

[EMAIL PROTECTED]:/home/wayne>telnet etaq3
Trying 192.168.0.12...
Connected to etaq3.etaq.com.
Escape character is '^]'.
Connection closed by foreign host.

[EMAIL PROTECTED]:/home/wayne>ping etaq3
PING etaq3.etaq.com (192.168.0.12): 56 data bytes
64 bytes from 192.168.0.12: icmp_seq=0 ttl=64 time=0.402 ms
64 bytes from 192.168.0.12: icmp_seq=1 ttl=64 time=0.618 ms
64 bytes from 192.168.0.12: icmp_seq=2 ttl=64 time=0.344 ms


-- Daniel C. Sobral Gerência de Operações Divisão de Comunicação de Dados Coordenação de Segurança TCO Fones: 55-61-313-7654/Cel: 55-61-9618-0904 E-mail: [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED]



To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

Reply via email to