Hello, I hope somebody here known well tap interfaces on freebsd :). I try to configure virtualbox with bridge interface. Everything seams ok: # ifconfig tap0
tap0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 00:bd:4f:0a:00:00 inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255 # ls -l /dev/tap0 crw-rw-rw- 1 root wheel 0, 109 Sep 27 16:54 /dev/tap0 The problem is that nothing pass in the tap0 interface. tcpdump does not show any traffic when I try to connect a machine on the 192.168 network. I can ping the interface address (192.168.0.1). But without with the use of the tap itself (use of lo0): # route -n get 192.168.0.1 route to: 192.168.0.1 destination: 192.168.0.1 interface: lo0 flags: <UP,HOST,DONE,LLINFO,WASCLONED,LOCAL> recvpipe sendpipe ssthresh rtt,msec rttvar hopcount mtu expire 0 0 0 0 0 0 16384 0 Then i have a tap interface up, but i can't pass to it any traffic. Does anybody have a suggestion, or know some debugging tools to show what append? Thanks Sebovick _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"