On Sun, Nov 15, 2009 at 07:11:14PM +0100, Sabine Baer wrote: > Well my problem is mounting my digital camera. If I remember correctly > I did it with > mount_msdosfs /dev/da0s1 /lumix > I think that was under FreeBSD 6.n > But now, upgraded to 7.2, there ist no /dev/da0. > Attached to an iBook with Mac OS X 10.4 the cards were well mounted as > 'disk2s1'.
Ok, then mounting it should work. > If I attach the camera to the FreeBSD PC the console gives > [attaching the camera] > | umass0: <Panasonic DMC-FX8, class 0/0, rev 1.10/0.10, addr 4> on > |uhub0 > |(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 > |(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > |(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition > |(probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > |(probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have > |changed > |(probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data) > |da0 at umass-sim0 bus 0 target 0 lun 0 > |da0: <MATSHITA DMC-FX8 0100> Removable Direct Access SCSI-2 device > |da0: 1.000MB/s transfers > |da0: 14MB (29121 512 byte sectors: 64H 32S/T 14C) I sometimes get error reports like this as well with USB sticks. I can usually see it on the drive as well, the drive's indicator light doesn't light up. Pulling out the USB cable and trying again usually helps, in my experience. Try another cable or another USB port if available. Sometimes it is necessary to use camcontrol(8) as per the earlier reply. > I haven't any clue if it's FreeBSD's fault, the camera's or mine. > Is there somone who can give me some hint? The USB stack in 7.2 doesn't always handle quirky hardware well. There could be a regression on your hardware going from 6.x to 7.2. The USB stack has been rewritten for 8.0. In my limited testing it works better. I've got 8.0-PRERELEASE running on a laptop without problems. Roland -- R.F.Smith http://www.xs4all.nl/~rsmith/ [plain text _non-HTML_ PGP/GnuPG encrypted/signed email much appreciated] pgp: 1A2B 477F 9970 BA3C 2914 B7CE 1277 EFB0 C321 A725 (KeyID: C321A725)
Description: PGP signature