Paul B Mahol schrieb:
Argh sorry, you need to use:
create_args_wlan0="wlanmode hostap"
Yep, it works now:
rc.conf:
wlans_rum0="wlan0"
create_args_wlan0="wlanmode hostap"
network_interfaces="lo0 rl0 wlan0" # List of network interfaces (or "auto").
ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
ifconfig_rl0="inet 172.27.4.219 netmask 255.255.248.0"
ifconfig_wlan0="inet 10.0.0.1/24 ssid OFFICE wepmode on wepkey
0xf00baaf00baaf00baaf00baaf0 weptxkey 1 channel 1"
defaultrouter="172.27.2.116"
ifconfig:
rum0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
ether 00:11:50:cb:52:10
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <hostap>
status: running
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 00:11:50:cb:52:10
inet 10.0.0.1 netmask 0xffffff00 broadcast 10.0.0.255
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <hostap>
status: running
ssid OFFICE channel 1 (2412 Mhz 11g) bssid 00:11:50:cb:52:10
country US authmode OPEN privacy ON deftxkey 1 wepkey 1:104-bit
txpower 0 scanvalid 60 protmode CTS dtimperiod 1 -dfs
Hmm, should I throw the Belkin thing into the waste and buy something
else? I was hoping that 8.0 had changed it to the better a bit. But if
you are saying, rum(4) is still crappy...
Not rum(4) but chip.
Thanks for helping.
--
Christoph
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
