Since upgrading to 8.0 RELEASE, I continually get these errors: ... Jun 11 15:24:08 xxxx kernel: ad6: 953869MB <Seagate ST31000340AS SD1A> at ata3-master SATA150 Jun 11 15:24:08 xxxx kernel: (probe6:ahc0:0:6:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 Jun 11 15:24:08 xxxx kernel: (probe6:ahc0:0:6:0): CAM Status: SCSI Status Error Jun 11 15:24:08 xxxx kernel: (probe6:ahc0:0:6:0): SCSI Status: Check Condition Jun 11 15:24:08 xxxx kernel: (probe6:ahc0:0:6:0): UNIT ATTENTION asc:29,2 Jun 11 15:24:08 xxxx kernel: (probe6:ahc0:0:6:0): SCSI bus reset occurred Jun 11 15:24:08 xxxx kernel: (probe6:ahc0:0:6:0): Retrying Command (per Sense Data) ...
I've tried 3 different drives w/ 2 different disk controllers. Anything I use as the second drive generates this message on boot, and will eventually fail with timeout errors after a couple hours. The other drive on the system, ad4, never displays these symptoms. This isn't new hardware, and worked flawlessly until now. Any suggestions? Has a bug been introduced into the ata driver? Regards, Casey _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[email protected]"
