Hi again all,
I have just installed FreeBSD 8 on my NFS server.
The older machines (FreeBSD 6.x) are able to connect to the NFS exports
fine.
I have also installed FreeBSD 8 to two more machines, 1 is a Dell 1850, and
the other an R200. Both of these machines had FreeBSD 6.x on them and were
able to connect to the share with no problem.
The error I am getting is: RPCPROG_NFS: RPC: Program not registered
I have pretty much memorized the handbook with regards to NFS at this point:
On the server, (from the Handbook), all the following are in rc.conf:
rpcbind_enable="YES"
nfs_server_enable="YES"
mountd_flags="-r"
On the Clietn(s), the following line is present:
nfs_client_enable="YES"
I have tried:
nfs_reserved_port_only="YES"
and
nfs_reserved_port_only="NO"
which does not appear to make a difference.
also,
start nfsiod -n 4 on the client, does not seem to start (not showing in the
process list anyways, and no console output whn I try to start it.
FYI, I can ping, ssh etc etc etc through the same IPS as the nfs
server/client use (192.168.0.x).
If it makes any difference the Server is uing fxp ethernet, and one client
is using em and the other bge.
I know there's something simple I am missing, but damned if I can find it. I
had the same issue trying to connect using the live filesystem a few weeks
back, so it seems to be something with freebsd 8. (Configuration?).
Any help appreciated,
-Grant
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
