On 2010.07.08 10:00, Matheus Weber da Conceição wrote: >> It has been a long time since I've done IPSec on FBSD, but I'm willing >> to bet that this has to do with routing, possibly amongst other things. >> On peer 'B' (FBSD box), what internal IP range are you trying to access >> the A network from...the same ones (ie. are you trying to bridge the >> networks)? >> > The -peer A- doesn't need to access any -peer B- networks. > >> Do you have access to the Cisco gear? > No. > >> If so, on FreeBSD, post the output of: >> >> % netstat -rn > > Notes: > tun0 is my ppp pseudo-device > tun5 is my openvpn tunel (192.168.5.0/24) > ============ > # netstat -rn > Routing tables
[ big snip ] IIRC, you don't need a gre tunnel through IPSec, as you are simply routing between two dissimilar networks. Don't quote me on this though, as I said earlier, it has been a very long time. On the FreeBSD box, assuming that you *only* want to access the three specific IPs you stated, do this: % route add 192.168.10.24/32 200.x.x.x % route add 192.168.201.196/32 200.x.x.x % route add 10.115.90.236/32 200.x.x.x On the Cisco side: % ip route 192.168.5.0 255.255.255.0 187.x.x.x.x If that works, on the FBSD side of things, add the following to /etc/rc.conf to make them persistent across reboots: static_routes="host1 host2 host3" route_host1="192.168.10.24/32 200.x.x.x" route_host2="192.168.201.196/32 200.x.x.x" route_host3="10.115.90.236/32 200.x.x.x" Steve _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"