Something caught my eye on a dmesg output the other day, and it got me wondering if this was going to cause me a problem in the near future.
ad4: 476940MB <Hitachi HDP725050GLA360 GM4OA5CA> at ata2-master SATA300 ad8: 476938MB <Hitachi HDP725050GLA360 GM4OA5CA> at ata4-master SATA300 I had a check of another machine I have with the same make and model of hard disk and they all seem to report 476940MB. ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) ada0: Native Command Queueing enabled ada1 at ahcich1 bus 0 target 0 lun 0 ada1: <Hitachi HDP725050GLA360 GM4OA5CA> ATA/ATAPI-8 SATA 2.x device ada1: 300.000MB/s transfers ada1: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) ada1: Native Command Queueing enabled ada2 at ahcich2 bus 0 target 0 lun 0 ada2: <Hitachi HDP725050GLA360 GM4OA5CA> ATA/ATAPI-8 SATA 2.x device ada2: 300.000MB/s transfers ada2: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) ada2: Native Command Queueing enabled ada3 at ahcich3 bus 0 target 0 lun 0 ada3: <Hitachi HDP725050GLA360 GM4OA5CA> ATA/ATAPI-8 SATA 2.x device ada3: 300.000MB/s transfers ada3: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) ada3: Native Command Queueing enabled I have recently run the Hitachi drive fitness test on both ad4 and ad8 as I was getting timeout error, both drives passed without any errors. Regards Graeme _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[email protected]"
