On Thu, May 26, 2011 at 4:18 PM, Steve Polyack <kor...@comcast.net> wrote: > I'm assuming these have the PERC H200 cards in them. If so, you will need > the mps(4) driver which is only available in FreeBSD 8-STABLE built sometime > after the 8.2 release. You can find ISO snapshots of 8-STABLE builds here > http://pub.allbsd.org/FreeBSD-snapshots/. Search the list archives for > "PERC H200" for more information.
I made a DVD from the ISO and then it booted. I had to destroy the RAID array, unfortunately. It looks 8-STABLE can see the disks as /dev/da0 and /dev/da1, but it can't see the array. My next issue is this: I can use the DVD to install 8.2-RELEASE, but not 8-STABLE. However, 8.2-RELEASE can't boot, sinc eit doesn't have the driver for the HDs. Am I missing something? Thanks, Jaime Kikpole -- Network Administrator Cairo-Durham Central School District http://cns.cairodurham.org _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
