On Tue, 2011-07-19 at 11:52 -0700, Chuck Swiger wrote: I discovered how to get to BIOS on the laptop. <esc> very early in the power process brings up a menu. F10 gets in to BIOS.
One item, OROM UI <enable/disable> was disabled. Enabling this flashes a menu for 2 sec on boot that allows <ctrl-I> to get into the raid ROM for setup. I see the ability to create/delete raid volume and reset to non-raid. The disk/volume information is ID Name Level Strip Size Status Bootable 0 RAID-0 RAID0(Stripe) 32KB 1.1TB Normal Yes Physical Port Device Model Serial Size Type/Statue(Vol ID) 0 Toshiba MK6461GS 61ABD08TB 596.1GB Member Disk(0) 1 Toshiba MK6461GS 61ABD08SB 596.1GB Member Disk(0) I still do not understand which disk to install to, ad4, ad6, or, ar0? See my earlier message containing the output of fdisk. tomdean _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"