On 9/5/2011 11:58 PM, Mikhail Goriachev wrote: > (p: #1 protoid=isakmp transform=1 > (t: #1 id=ike (type=lifetype value=sec)(type=lifeduration > value=7080)(type=enc value=3des)(type=auth > value=preshared)(type=hash value=sha1)(type=group desc > value=modp1024)))) > (vid: len=16 afcad71372a1f1c96b8696fc99570100) > 03:17:31.637424 IP (tos 0x0, ttl 50, id 0, offset 0, flags [DF], proto UDP > (17), length 108) > w.x.y.z.500 > a.b.c.d.500: [udp sum ok] isakmp 1.0 msgid cookie ->: > phase 1 R ident: > (sa: doi=ipsec situation=identity > (p: #1 protoid=isakmp transform=1 > (t: #1 id=ike (type=lifetype value=sec)(type=lifeduration > value=7080)(type=enc value=3des)(type=auth > value=preshared)(type=hash value=sha1)(type=group desc > value=modp1024))))
OK, both sides are 3des, psk and sha1 dhgroup 1. Thats good. > > Note: a.b.c.d is my end. w.x.y.z is the other end. "vid:", "ke:" and > "nonce:" are scrambled. > flag=0x8000, lorv=AES-CBC > Sep 5 20:40:27 vpnmach racoon: DEBUG: encryption(aes) > Sep 5 20:40:27 vpnmach racoon: DEBUG: type=Hash Algorithm, flag=0x8000, > lorv=MD5 > Sep 5 20:40:27 vpnmach racoon: DEBUG: hash(md5) > Sep 5 20:40:27 vpnmach racoon: DEBUG: type=Authentication Method, ... yet, you have AES and md5 ?? where are those coming from ? Do you have an extra config for the remote somewhere in your files perhaps that is matching ? ---Mike > remote w.x.y.z { > exchange_mode main; > proposal_check obey; > > proposal { > encryption_algorithm 3des; > hash_algorithm sha1; > authentication_method pre_shared_key; > dh_group modp1024; > } > } > -- ------------------- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, m...@sentex.net Providing Internet services since 1994 www.sentex.net Cambridge, Ontario Canada http://www.tancsa.com/ _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"