Hello,
I'm using ppp(1) with mode -auto in a FreeBSD 8.x (an older 8-CURRENT);
I'm reading in the man page that the link is not coming up until
packages for the tun interface are arriving...
But my ppp starts chatting and LCP... just when it is started. My
ppp.conf file is attached; any ideas? Thanks in advance
matthias
--
Matthias Apitz
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <[email protected]> - w http://www.unixarea.de/
#
#
default:
set log Phase Chat LCP IPCP CCP tun command
umts:
set device /dev/cuaU0.0 # device name in CURRENT
set speed 230400
#
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
\"\" AT OK-AT-OK ATZ OK \
AT+CFUN=1 OK \
AT+COPS=0 OK \
AT+CGDCONT=1,\\\"IP\\\",\\\"pinternet.interkom.de\\\" OK \
\\dATDT\\T TIMEOUT 40 CONNECT"
set logout "ABORT BUSY ABORT ERROR TIMEOUT 30 \"\" +++ATH O ATH OK"
set phone *99*1\#
set authname "fonic"
set authkey "fonic"
set timeout 300
set ifaddr 0.0.0.0/0 10.64.64.64/0 255.255.255.0 0.0.0.0
add default HISADDR
enable dns
disable ipv6cp
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[email protected]"
