On Thu, 17 Nov 2011, Xihong Yin wrote:
Hi,
I upgraded from 8.0 stable to 8.2 stable today. Now I can't connect to the
network through the network adapter. I've set DCHP and SYNCDHCP in
/etc/rc.conf and it worked in 8.0. It seems the dhclient problem. The ip
address can't be obtained.
When I run 'dhclient em0' manually, it shows that an ip address is leased.
But actually it is not. The 'ifconfig em0' always shows an address of 0.0.0.0
with active status.
$dhclient em0
DHCPREQUEST on em0 to 255.255.255.255 port 67
DHCPACK from 192.168.3.1
bound to 192.168.3.39 -- renewal in 43200 seconds
But
$ifconfig em0
em0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=389b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC>
ether 6c:62:6d:03:16:31
inet 0.0.0.0 netmask 0xffffff00 broadcast 255.255.255.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (10baseT/UTP <half-duplex>)
status: active
Any help would be appreciated.
The interface is down: no "UP" in the flags. What happens if you just
do it manually:
ifconfig em0 up
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
