/usr/ports/sysutils/apcupsd ?
? - so what to give as device? /dev/ugen1.3?
set
UPSCABLE usb
UPSTYPE usb
not set DEVICE as specified in comments for USB devices.
can't find UPS. tried setting DEVICE to /dev/ugen1.3 - no avail.
tried /usr/ports/sysutils/nut
selected "EVER" driver, and set up /dev/ugen1.3 as port - driver fails.
from what i found in linux groups it should work as USB HID device. but
uhid doesn't attach.
On 05/14/2012 14:06, Wojciech Puchar wrote:
seems like it is very badly made USB interface, all class data is empty,
ugen1.3: <ECO Pro Series UPS EVER> at usbus1, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0101
bDeviceClass = 0x0000
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0008
idVendor = 0x0403
idProduct = 0xe520
bcdDevice = 0x0400
iManufacturer = 0x0001 <EVER>
iProduct = 0x0002 <ECO Pro Series UPS>
iSerialNumber = 0x0003 <ECOPRO00>
bNumConfigurations = 0x0001
FreeBSD gives only ugen interface.
what (if any) software support that?
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
"freebsd-questions-unsubscr...@freebsd.org"
--
No trees were killed in the creation of this message.
However, many electrons were terribly inconvenienced.
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"