There were no errors during the build and I'm able to load the
resultant ndis, but aside from some initial static when the ndis is
loaded the card is not being configured. ndis0 doesn't show in the
dmesg and doesn't appear in the ifconfig output.
Before I built the wrapper I had updated my source, base and
userland so all of that should have been up to date for the system I
was building it against.
I'm getting to the point where I'd rather spend the cash on
something compatible from Free's hardware list, but I'd like to give
this ndis thing one more go before I tell this family member to
chuck the card.
kldstat
Id Refs Address Size Name
1 18 0xc0400000 fd35e8 kernel
2 1 0xc13d4000 4bdd4 bcmwl5_sys.ko
3 3 0xc1420000 1fa58 ndis.ko
4 2 0xc1440000 f1e4 if_ndis.ko
ifconfig
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 02:00:39:16:49:4e
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
lladdr 0.0.39.0.0.16.49.4e.a.2.ff.fe.0.0.0.0
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=2009<RXCSUM,VLAN_MTU,WOL_MAGIC>
ether 00:00:39:f4:73:9f
inet 10.0.1.19 netmask 0xffffff00 broadcast 10.0.1.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7 inet
127.0.0.1 netmask 0xff000000 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
dmesg
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE-p3 #0: Mon Apr 29 18:11:52 UTC 2013
r...@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC i386
CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.70GHz (1694.54-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Family = f Model = 2 Stepping = 4
Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 536870912 (512 MB)
avail memory = 501706752 (478 MB)
kbd1 at kbdmux0
ctl: CAM Target Layer loaded
acpi0: <TOSHIB 5100> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 1fed0000 (3) failed
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xee08-0xee0b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> on hostb0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem
0xfd000000-0xfdffffff,0xd8000000-0xdfffffff,0xd7f80000-0xd7ffffff irq 5
at device 0.0 on pci1
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port
0xefe0-0xefff irq 11 at device 29.0 on pci0
usbus0 on uhci0
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port
0xef80-0xef9f irq 7 at device 29.1 on pci0
usbus1 on uhci1
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port
0x1000-0x101f at device 29.2 on pci0
usbus2 on uhci2
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
fwohci0: <Texas Instruments TSB43AB22/A> at device 7.0 on pci2
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:39:00:00:16:49:4e
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:39:16:49:4e
fwe0: Ethernet address: 02:00:39:16:49:4e
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:00:39:00:00:16:49:4e @ 0xfffe00000000, S400,
maxrec 2048
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x1f65c000
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1,
CYCLEMASTER mode
fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0xdf40-0xdf7f mem
0xfceff000-0xfcefffff irq 4 at device 8.0 on pci2
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> PHY 1 on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
fxp0: Ethernet address: 00:00:39:f4:73:9f
cbb0: <ToPIC100 PCI-CardBus Bridge> at device 11.0 on pci2
cbb0: chip is in D3 power mode -- setting to D0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <ToPIC100 PCI-CardBus Bridge> at device 11.1 on pci2
cbb1: chip is in D3 power mode -- setting to D0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci2: <base peripheral> at device 12.0 (no driver attached)
pci2: <base peripheral> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xcfa0-0xcfaf irq 6 at device 31.1
on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
pcm0: <Intel ICH3 (82801CA)> at device 31.5 on pci0
pcm0: <Yamaha YMF753 AC97 Codec>
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xe0000-0xeffff pnpid
ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: parallel port not found.
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire0: bus
manager 0 Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
cardbus1: Expecting link target, got 0x7
cardbus1: Expecting link target, got 0x7
cardbus1: <network, ethernet> at device 0.0 (no driver attached)
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ugen1.2: <Synaptics Inc.> at usbus1
ums0: <Rel> on usbus1
ums0: 3 buttons and [XY] coordinates ID=0
(aprobe0:ata1:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00
00 00
(aprobe0:ata1:0:1:0): CAM status: Command timeout
(aprobe0:ata1:0:1:0): Error 5, Retry was blocked
run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config
(aprobe0:ata1:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00
00 00
(aprobe0:ata1:0:1:0): CAM status: Command timeout
(aprobe0:ata1:0:1:0): Error 5, Retry was blocked
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <TOSHIBA MK4019GAX FA003E> ATA-5 device
ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0: 38154MB (78140160 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad0
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <MATSHITA UJDA730 DVD/CDRW 1.00> Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
- tray closed
Trying to mount root from ufs:/dev/ada0p2 [rw]...
fxp0: link state changed to UP
pciconf
hostb0@pci0:0:0:0: class=0x060000 card=0x00011179 chip=0x1a308086
rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '82845 845 [Brookdale] Chipset Host Bridge'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:1:0: class=0x060400 card=0x00000000 chip=0x1a318086
rev=0x04 hdr=0x01
vendor = 'Intel Corporation'
device = '82845 845 [Brookdale] Chipset AGP Bridge'
class = bridge
subclass = PCI-PCI
uhci0@pci0:0:29:0: class=0x0c0300 card=0x00011179 chip=0x24828086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM USB Controller'
class = serial bus
subclass = USB
uhci1@pci0:0:29:1: class=0x0c0300 card=0x00011179 chip=0x24848086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM USB Controller'
class = serial bus
subclass = USB
uhci2@pci0:0:29:2: class=0x0c0300 card=0x00011179 chip=0x24878086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM USB Controller'
class = serial bus
subclass = USB
pcib2@pci0:0:30:0: class=0x060400 card=0x00000000 chip=0x24488086
rev=0x42 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Mobile PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:0:31:0: class=0x060100 card=0x00000000 chip=0x248c8086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CAM ISA Bridge (LPC)'
class = bridge
subclass = PCI-ISA
atapci0@pci0:0:31:1: class=0x01018a card=0x00011179 chip=0x248a8086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CAM IDE U100 Controller'
class = mass storage
subclass = ATA
pcm0@pci0:0:31:5: class=0x040100 card=0x00021179 chip=0x24858086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM AC'97 Audio Controller'
class = multimedia
subclass = audio
none0@pci0:0:31:6: class=0x070300 card=0x00011179 chip=0x24868086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM AC'97 Modem Controller'
class = simple comms
subclass = generic modem
vgapci0@pci0:1:0:0: class=0x030000 card=0x00011179 chip=0x017410de
rev=0xa3 hdr=0x00
vendor = 'nVidia Corporation'
device = 'NV17 [GeForce4 440 Go]'
class = display
subclass = VGA
fwohci0@pci0:2:7:0: class=0x0c0010 card=0x00011179 chip=0x8023104c
rev=0x00 hdr=0x00
vendor = 'Texas Instruments'
device = 'TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx]'
class = serial bus
subclass = FireWire
fxp0@pci0:2:8:0: class=0x020000 card=0x00011179 chip=0x10318086 rev=0x42
hdr=0x00
vendor = 'Intel Corporation'
device = '82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller'
class = network
subclass = ethernet
cbb0@pci0:2:11:0: class=0x060700 card=0x00011179 chip=0x06171179
rev=0x32 hdr=0x02
vendor = 'Toshiba America Info Systems'
device = 'ToPIC100 PCI to Cardbus Bridge with ZV Support'
class = bridge
subclass = PCI-CardBus
cbb1@pci0:2:11:1: class=0x060700 card=0x00011179 chip=0x06171179
rev=0x32 hdr=0x02
vendor = 'Toshiba America Info Systems'
device = 'ToPIC100 PCI to Cardbus Bridge with ZV Support'
class = bridge
subclass = PCI-CardBus
none1@pci0:2:12:0: class=0x088000 card=0x00011179 chip=0x08041179
rev=0x03 hdr=0x00
vendor = 'Toshiba America Info Systems'
device = 'TC6371AF SmartMedia Controller'
class = base peripheral
none2@pci0:2:13:0: class=0x088000 card=0x00011179 chip=0x08051179
rev=0x03 hdr=0x00
vendor = 'Toshiba America Info Systems'
device = 'SD TypA Controller'
class = base peripheral
none3@pci0:5:0:0: class=0x020000 card=0x00291737 chip=0x222017fe
rev=0x00 hdr=0x00
vendor = 'InProComm Inc.'
device = 'IPN 2220 802.11g'
class = network
subclass = ethernet
