Hi all,

My /dev/bktr device is not working stable, sometimes it works fine but most of the time I receive this message


pci0: <multimedia, video> at device 6.0 (no driver attached)
pci0: <multimedia> at device 6.1 (no driver attached)

Other times it's :

bktr0: <BrookTree 878> at device 10.0 on pci0
bktr0: could not map memory
device_probe_and_attach: bktr0 attach returned 6

Again other times my unit fezes during the kernel load (not execute, directly after the countdown).

Exceptional everything works fine and I have to run XFree86 and FXTV directly after boot to initialize the card for stable performance like described in http://www.freebsd.org/cgi/query-pr.cgi?pr=48279

My kernel add for this device:

# Hauppage WinTV/PCI Add by Zeo 25/06/2003
device          bktr
device          iicbus
device          iicbb
device          smbus

My system board is a MSI-KT3Ultra2-R attached the output from dmesg in a txt file with latest BIOS flashed in the memory.
Try a other PCI slot and setting the IRQ to 11 in the BIOS, but this didn't solved the issue.
I'm using FreeBSD 5.0-RELEASE.

More info on my system are on http://www.zaleo.homeunix.net/ (phpSysInfo).

I need to have this card running for testing/debugging the new version of the bktr2jpeg-2.0a9 tool under FreeBSD. (the release version will have a other name because more devices are sported). A very nice demon to capture your webcam and host it with a built in http demon. http://core.de/~coto/projects/bktr2jpeg/

Thanks for reading this mail, hoping on a hind about how to solve this issue.
Kind regards, Zeo Smeijsters.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE #2: Sun Jun 29 17:19:06 CEST 2003
    [EMAIL PROTECTED]:/usr/src/sys/i386/compile/ZALEO
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0761000.
Preloaded elf module "/boot/kernel/splash_bmp.ko" at 0xc07610a8.
Preloaded elf module "/boot/kernel/vesa.ko" at 0xc0761158.
Preloaded splash_image_data "/boot/splash.bmp" at 0xc0761204.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc0761254.
Preloaded elf module "/boot/kernel/nvidia.ko" at 0xc0761300.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07613ac.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 1733404364 Hz
CPU: AMD Athlon(tm) XP 2100+ (1733.40-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x662  Stepping = 2
  AMD Features=0xffffffffc0400000<AMIE,DSP,3DNow!>
real memory  = 536805376 (511 MB)
avail memory = 513916928 (490 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
VESA: v3.0, 32768k memory, flags:0x1, mode table:0xc0584c22 (1000022)
VESA: NVidia
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT VIA_K7  > on motherboard
    ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
Using $PIR table, 11 entries at 0xc00f7f20
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <GeForce2 Ti> mem 0xd0000000-0xd7ffffff,0xde000000-0xdeffffff irq 11 at 
device 0.0 on pci1
pcm0: <Creative EMU10K1> port 0xd400-0xd41f irq 11 at device 5.0 on pci0
pci0: <multimedia, video> at device 6.0 (no driver attached)
pci0: <multimedia> at device 6.1 (no driver attached)
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd000-0xd07f mem 0xdfff7f80-0xdfff7fff 
irq 5 at device 7.0 on pci0
xl0: Ethernet address: 00:04:75:98:d6:bd
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: <RealTek 8139 10/100BaseTX> port 0xcc00-0xccff mem 0xdfff7e00-0xdfff7eff irq 10 
at device 8.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet address: 00:48:54:56:9b:fa
miibus1: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus1
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci0: <Promise TX2 ATA133 controller> port 
0xd800-0xd80f,0xdc00-0xdc03,0xe000-0xe007,0xe400-0xe403,0xe800-0xe807 mem 
0xdfffc000-0xdfffffff irq 10 at device 12.0 on pci0
ata2: at 0xe800 on atapci0
ata3: at 0xe000 on atapci0
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <VIA 8235 ATA133 controller> port 0xfc00-0xfc0f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
acpi_button1: <Sleep Button> on acpi0
fdc0: cmd 3 failed at out byte 1 of 3
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
fdc0: cmd 3 failed at out byte 1 of 3
pmtimer0 on isa0
orm0: <Option ROMs> at iomem 0xd4000-0xd47ff,0xcb800-0xd3fff,0xc0000-0xcb7ff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0: cannot reserve I/O port range (6 ports)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
Timecounters tick every 10.000 msec
acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2%
ad0: DMA limited to UDMA33, non-ATA66 cable or device
ad0: 117246MB <Maxtor 6Y120P0> [238216/16/63] at ata0-master UDMA33
acd0: CDROM <Compaq CRD-8322B> at ata0-slave PIO4
ar0: 76345MB <ATA RAID0 array> [9732/255/63] status: READY subdisks:
 0 READY ad4: 38172MB <MAXTOR 6L040J2> [77557/16/63] at ata2-master UDMA133
 1 READY ad6: 38172MB <MAXTOR 6L040J2> [77557/16/63] at ata3-master UDMA133
Opened disk ad4 -> 16
Opened disk ad4 -> 16
Opened disk ad6 -> 16
Opened disk ad6 -> 16
Mounting root from ufs:/dev/ad0s1a
psmintr: out of sync (0000 != 0008).
psmintr: discard a byte (1).
nvidia0: detached
nvidia0: <GeForce2 Ti> mem 0xd0000000-0xd7ffffff,0xde000000-0xdeffffff irq 11 at 
device 0.0 on pci1
[EMAIL PROTECTED] mailing list
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to