Once user ppp makes the connection and the line speed is set, any self adjustment to the line speed made by the modem is not captured by user ppp. Furthermore I have not seen any (modem terminal servers) that captures and report on this ether. Some pci modem mfg have added an I-reg to capture the max and mim line speed during an modem session which can be accessed using Hayes 'AT' commands after the online modem session has completed. There is no way to see this speed as it changes to compensate for line noise.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Jesse Guardiani Sent: Friday, September 12, 2003 5:07 PM To: [EMAIL PROTECTED] Subject: RE: 56k pccard modem connect speed? fbsd_user wrote: > Issue this command from console after modem connection is complete > Cat /var/log/ppp.log | grep CONNECT Sweet. I must have missed that line in all the noise. Thanks. Another question: I know that WingNET's 3com Total Control Chassis (modem terminal server) will modulate connected modems up or down depending on line static, noise, etc... Are events like this logged in ppp.log? Is there a command I can run, while connected, that will tell me my current connect speed? Or is this something internal to the modem that I can't retreive? Thanks. -- Jesse Guardiani, Systems Administrator WingNET Internet Services, P.O. Box 2605 // Cleveland, TN 37320-2605 423-559-LINK (v) 423-559-5145 (f) http://www.wingnet.net _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"