Hi list,

i upgrade my sources every night from CVS using the RELENG_4 tag.
The changes from 13-OCT seem to have broken something.
When i booted the newly compiled kernel and tried to do a

cd /usr/src; make -j4 buildworld

the system froze after some 10 minutes and i had to press RESET.
No errors were reported. This happended twice.
Apart from that, the system seemed to run normal.
I then booted the kernel as of 10-OCT and buildworld was ok.

The changes were:

P share/examples/cvsup/cvs-supfile
P share/examples/cvsup/ports-supfile
P share/examples/cvsup/refuse
P share/examples/cvsup/refuse.README
P sys/kern/uipc_mbuf.c
P sys/netinet/ip_output.c
P sys/sys/mbuf.h

Are there any known issues with this?

I am attaching dmesg output and will happily supply more info if required :-)


        Heinrich Rebehn

Heinrich Rebehn

University of Bremen
Physics / Electrical and Electronics Engineering
- Department of Telecommunications -

Phone : +49/421/218-4664
Fax   :            -3341
   3937 Feb 10  2003 a2ps-print.el
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped

syncing disks... 
m 555   rarpd Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.9-PRERELEASE #4: Thu Sep 11 13:49:53 CEST 2003
    [EMAIL PROTECTED]:/export/huge/usr/obj/usr/src/sys/ANTSRV1
Timecounter "i8254"  frequency 1193182 Hz
CPU: AMD Athlon(TM) XP1800+ (1544.67-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x662  Stepping = 2
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 1073659904 (1048496K bytes)
avail memory = 1041371136 (1016964K bytes)
Preloaded elf kernel "kernel" at 0xc0371000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00f1770
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AcerLabs M5247 PCI-PCI(AGP Supported) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 5046 graphics accelerator> at 0.0 irq 11
atapci0: <AcerLabs Aladdin ATA100 controller> port 0xb400-0xb40f at device 4.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xa400-0xa47f mem 0xe8800000-0xe880007f 
irq 15 at device 9.0 on pci0
xl0: Ethernet address: 00:50:04:3c:aa:1c
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0xa000-0xa07f mem 0xe8000000-0xe800007f 
irq 10 at device 10.0 on pci0
xl1: Ethernet address: 00:04:76:28:70:0e
miibus1: <MII bus> on xl1
xlphy1: <3c905C 10/100 internal PHY> on miibus1
xlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
twe0: <3ware Storage Controller> port 0x9800-0x980f mem 
0xe7000000-0xe77fffff,0xe7800000-0xe780000f irq 11 at device 12.0 on pci0
twe0: 8 ports, Firmware FE7X, BIOS BE7X
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x9400-0x94ff mem 0xe6800000-0xe6800fff 
irq 9 at device 13.0 on pci0
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
chip1: <AcerLabs M15x3 Power Management Unit> at device 17.0 on pci0
orm0: <Option ROMs> at iomem 
0xc0000-0xcafff,0xcc000-0xcc7ff,0xd0000-0xd0fff,0xd4000-0xd47ff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: DMA limited to UDMA33, non-ATA66 cable or device
ad0: 39266MB <IC35L040AVVN07-0> [79780/16/63] at ata0-master UDMA33
acd0: CDROM <LTN382> at ata0-slave PIO4
Waiting 15 seconds for SCSI devices to settle
twed0: <Unit 0, RAID0, Normal> on twe0
twed0: 478742MB (980465408 sectors)
twed1: <Unit 2, RAID5, Normal> on twe0
twed1: 293215MB (600505600 sectors)
twe0: command interrupt
sa0 at ahc0 bus 0 target 0 lun 0
sa0: <QUANTUM DLT7000 391B> Removable Sequential Access SCSI-2 device 
sa0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
Mounting root from ufs:/dev/ad0s1a
cd0 at ahc0 bus 0 target 1 lun 0
cd0: <PIONEER DVD-ROM DVD-305 1.03> Removable CD-ROM SCSI-2 device 
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
/dev/vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 $
/dev/vmmon: Module vmmon: initialized
cd9660: RockRidge Extension
cd9660: RockRidge Extension
cd9660: RockRidge Extension
cd9660: Joliet Extension (Level 1)
cd9660: Joliet Extension (Level 1)
cd9660: RockRidge Extension
cd9660: RockRidge Extension
cd9660: RockRidge Extension
cd9660: Joliet Extension (Level 3)
microuptime() went backwards (3155.631423 -> 2460.090676)
[EMAIL PROTECTED] mailing list
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to