Hello to all

I have with me a USB 10/100 Ethernet which is currently not being recognised by my FreeBSD-4.8_RELEASE-p5
The packaging name is Billionton, however it doesnt match any of the device listed in sys/dev/usd/usbdevs.


My kernel is compiled with all the USB Ethernet device drivers - aue, kue, cue
Booting my box with the device attached, however, merely results in it being attached the device name ugen0.


Output of usbdevs -vd is as follows:
-------------------------------------------------
Controller /dev/usb0:
addr 1: self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
uhub0
port 1 addr 2: power 120 mA, config 1, USB 10/100 LAN(0x8150), USBKR100(0x0bda), rev 1.00
ugen0
port 2 powered


Relevant dmesg:
------------------------
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ugen0: USBKR100 USB 10/100 LAN, rev 1.10/1.00, addr 2


Anyone can guide me in making this device work? I have tried mucking around with sys/dev/usb/usbdevs, usbdevs.h, usbdevs_data.h and if_aue.c - cd ../../modules/aue && make && make install
but this results in my boot-up being stuck during probe of the device


Any pointers is very much appreciated.

--
Feisal
Webcraft Solutions - http://www.webcraftsolutions.com
--------------------------------------
In Tulsa, Oklahoma, it is against the law to open a soda bottle without
the supervision of a licensed engineer.


_______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to