[please use reply to all to include the list]

On Wed, 2003-10-01 at 12:56, Verghese George wrote:
> Andreas,
> Thanks. The card is still not recognised when booting up. The GENERIC
> kernel does not seem to have an entry
> device trm
> Does it mean that I have to recompile the kernel?
> Thanks 
> Verghese George

I do not know exactly if FreeBSD 4.x has a trm module, but you might
first try to do 
kldload trm
If that does work (i.e. print some success messages), you can add
to your /boot/loader.conf file to have the trm module loaded at boot

If the trm.ko module is not available, yes, you need to recompile your
kernel as described in the handbook.


> >>> Andreas Kohn <[EMAIL PROTECTED]> 09/30/03 8:33 PM >>>
> On Tue, 2003-09-30 at 07:20, Verghese George wrote:
> > Could someone help me with this problem?
> > I connected the hp surestore dat 24 drive with Free BSD 4.8 . It has a
> > Ultra SCSI DC-315U drive (Tekram technology Co. Ltd). This card is not
> > recognised by the system. Is there a driver I can use with this card? 
> I
> > got  dc395_trm.tar.gz , untarred and unzipped it and  copied
> > dc395x_trm.c and dc395x_trm.h to  /usr/src/sys/pci directory (as per
> the
> > instructions at the website).   I also edited
> > /usr/src/sys/i386/conf/GENERIC and gave a device name tekram_trm0.
> When
> > I tried to recompile the kernel, this name was not recognised. 
> > 
> > Am I following the right procedure?  Can somebody advise me?
> > Thanks
> > 
> > Verghese George
> Hi,
> according to the trm(4) man page, the Tekram DC-315U should be supported
> in 4.8:
> http://www.freebsd.org/cgi/man.cgi?query=trm&apropos=0&sektion=4&manpath=FreeBSD+4.8-RELEASE&format=html

Attachment: signature.asc
Description: This is a digitally signed message part

Reply via email to