Indeed, after specifying 10Mbps media it works fine. Thanks!

Alex


On Fri, 10 Oct 2003, Andrew White wrote:

> Mine is on 10/100 network, and negotiates 100mb everytime, still
> functions ok, no issues at all (other than LEDS)
> 
> Andrew
> 
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Scott Mitchell
> Sent: 09 October 2003 17:48
> To: Alexey Koptsevich
> Cc: [EMAIL PROTECTED]
> Subject: Re: problem with aue card
> 
> On Thu, Oct 09, 2003 at 03:23:15AM -0400, Alexey Koptsevich wrote:
> > 
> > Hi,
> > 
> > I have a problem with the network card Linksys USB100TX. The hardware
> > itself is known to be working, but not under FreeBSD. 
> > 
> > Here is dmesg:
> > 
> > Oct  8 21:10:39 pyosik kernel: aue0: LINKSYS Inc. LINKSYS USB Adapter,
> rev 1.10/1.01, addr 2
> > Oct  8 21:10:40 pyosik kernel: aue0: Ethernet address:
> 00:e0:98:82:f3:e6
> > Oct  8 21:10:40 pyosik kernel: miibus1: <MII bus> on aue0
> > Oct  8 21:10:40 pyosik kernel: bmtphy0: <BCM5201 10/100baseTX PHY> on
> miibus1
> > Oct  8 21:10:40 pyosik kernel: bmtphy0:  10baseT, 10baseT-FDX,
> 100baseTX, 100baseTX-FDX, auto
> > 
> > After loading if_ep the interface appears in the output of ifconfig,
> but
> >  Oct  8 21:18:17 pyosik kernel: aue0: MII read timed out
> > 
> > When I then try 'dhclient aue0', I get thousands of messages
> >  aue0: usb error on rx: IOERROR
> > 
> > Any piece of advice how to make this card work would be appreciated.
> 
> Are you on a 100Mbps network?  Our driver seems to have issues with this
> device on such networks, although it seems to work fine on 10Mbps
> connections.
> 
>       Scott
> 
> 


_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to