"Justin P. Michel" <[EMAIL PROTECTED]> writes:
> I am having a problem with NAT.
> I have my FreeBSD system, running 4.8, cvsup'd to p13. I have the following
> in my kernel configuration:
> options IPDIVERT
> options IPFIREWALL
> options IPFIREWALL_VERBOSE
> options IPFIREWALL_VERBOSE_LIMIT=10
> I have two network adapters, both Realtek 8139s. The first is set to
> 192.168.0.2, the second is set to 10.0.0.1.
> The 192.168.0.2 one plugs into my router, and the 10.0.0.1 one plugs into my
> local hub (just like in the picture in the handbook).
> The system can ping and talk fine with the outside world. However, when I
> plug a system into the hub, the FreeBSD systems assigns it an IP (I'm
> running dhcpd on the FreeBSD system as well), and I can ping the FreeBSD
> system on the 10.0.0.1 interface, but I can not ping the other interface, or
> access the outside world.
> I have the following in my rc.conf as well:
> ifconfig_rl0="inet 192.168.0.2 netmask 255.255.255.0"
> ifconfig_rl1="inet 10.0.0.1 netmask 255.255.255.0"
> Am I missing something? I followed the instructions in the handbook, (and
> have set up similar networks that worked fine) but can not seem to get this
> one to go. If anyone can shed some light on this situation, please let me
Are the client systems sending out packets at all?
You can use tcpdump(1) on the FreeBSD router to check.
If not, maybe they're not getting configured with a default route or
[EMAIL PROTECTED] mailing list
To unsubscribe, send any mail to "[EMAIL PROTECTED]"