Both the board(s) and the processors were RMA'd. Both boards and all four (4) processors were swapped around between both OS's and the problem remains using the hardware with the FreeBSD OS. The latest BIOS is installed.
We also have a newly purchased board (S-2466), the same thing occurs. Details @ http://18.104.22.168/freebsd/installation/sysctl_variables_missing ----- Original Message ----- From: "jon" <[EMAIL PROTECTED]> To: "nw1" <[EMAIL PROTECTED]> Sent: Monday, November 03, 2003 10:00 PM Subject: Re: Overheating attributed to Freebsd --sysctl variables notavailable-- > On Mon, 2003-11-03 at 19:57, nw1 wrote: > > > What version of FreeBSD are you using? > > > Did you compile amp into the kernel? > > > > I think you're not understanding what I posted @ > > http://22.214.171.124/freebsd/installation/sysctl_variables_missing > > > > The first line has what version I'm running. The entire document @ > > http://126.96.36.199/freebsd/installation/sysctl_variables_missing implies; this > > was a > > running system with no serious issues; meaning; the sysctl items I'm speaking of > > were in > > fact available and working. > > i can say from prior experience w/ hardware, if you system has > overheated you dont know where you stand (you may have damaged all kinds > of stuff, we had a board that over heated; then 2nd ide channel went > down, when we used micron ram!?! and micron was fine in board until the > overheat then any other brand ram worked) tyan has a three year warranty > use it! BUT my bet is there is a change in the chipset and you wont get > the sysctl mibs anyway. you try the newest BIOS flash? > > good luck > > if you want to ensure you get a new board, flex it until you stretch a > trace or two. > > > _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"