On Tuesday 18 November 2003 02:42 pm, Joe Marcus Clarke wrote: > On Tue, 2003-11-18 at 15:33, fbsd_user wrote: > > FBSD 4.9 with GENERIC kernel found my PCI modem. > > The PC's bio's has all com ports disabled. > > The boot log shows this. > > > > sio0: <Lucent kermit based PCI Modem> port > > 0xe400-0xe407,0xe000-0xe0ff,0xdc00-0xdcff mem 0xe2000000-0xe20000ff > > irq 3 at device 19.0 on pci0 > > sio0: moving to sio4 > > sio4: type 16550A > > > > This is an zoom modem model 2920. It has onboard DSP and controller. > > > > > > Question; > > What do I tell user ppp the modem's device is? > > The device is /dev/cuaa4. > > > How can I send Hayes AT commands to modem? > > cu -l /dev/cuaa4
I have exectly the same issue here. I have been trying to cu to my modem for a while now, with no success. [EMAIL PROTECTED] ~]# cu -l /dev/cuaa4 cu: open (/dev/cuaa4): Permission denied cu: /dev/cuaa4: Line in use [EMAIL PROTECTED] ~]# ls -l /dev/cuaa* crw-rw---- 1 uucp dialer 28, 128 Nov 16 16:31 /dev/cuaa0 crw-rw---- 1 uucp dialer 28, 129 Nov 16 16:31 /dev/cuaa1 crw-rw---- 1 uucp dialer 28, 130 Nov 16 16:31 /dev/cuaa2 crw-rw---- 1 uucp dialer 28, 131 Nov 16 16:31 /dev/cuaa3 crw-r----- 1 root wheel 28, 132 Nov 16 06:18 /dev/cuaa4 Any suggestions as to how I can talk to my modem? _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"