The C137 (in my case, black with a 90W PSU). It wil accomodate a flex ATX board, as well as the smaller Mini ITX board. If you order the dual riser card, they will throw in an extra extender with it (since they assume you will be running an ITX board in it)
Case Outlet doesn't appear to carry them, but you can get an AGP riser from the company that builds them, should you want to use a flex ATX board. My next pvr system will likely be built in one of these. One important caveat - you can't stuff both a normal 3.5" HDD and a 2nd PCI card. Fortunately, the bracket can accomodate a laptop (2.5") hard disk as well as a normal 3.5" drive, so I went that route instead. Regards, Seth Henry On Thursday 20 November 2003 13:25, [EMAIL PROTECTED] wrote: > On Thu, 20 Nov 2003, J. Seth Henry wrote: > > Guys, > > Case Outlet*, and perhaps others by now, have the Travla Flex ATX / mini > > ITX case that will accomodate two PCI cards. I have an 933MHz EPIA board > > with two 3c905TX-C NICs, and have seen a substantial improvement in > > performance over my old Netgear router. > > Which model did you get? > Don't see any model as "Flex". The models they have are C### (ie C137, > etc). The only one I see listed with 2 PCI is the 137. Is that the one you > got? _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"