Script started on Thu Dec  4 14:33:51 2003
> dmesg	

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #0: Thu Apr  3 10:53:38 GMT 2003
    root@freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (433.38-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x665  Stepping = 5
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 331284480 (323520K bytes)
avail memory = 316723200 (309300K bytes)
Preloaded elf kernel "kernel" at 0xc051d000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00fdda0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <SIS Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
atapci0: <SiS 5591 ATA66 controller> port 0x4000-0x400f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 irq 14 at device 0.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
isab0: <SiS 85c503 PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <unknown card> (vendor=0x1039, dev=0x0009) at 1.1
ohci0: <SiS 5571 USB controller> mem 0xe5a00000-0xe5a00fff irq 5 at device 1.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Texas Instruments UT-USB41 hub, class 9/0, rev 1.10/1.10, addr 2
uhub1: 4 ports with 4 removable, bus powered
ukbd0: Microsoft Microsoft Natural Keyboard Pro, rev 1.10/1.11, addr 3, iclass 3/1
kbd0 at ukbd0
uhid0: Microsoft Microsoft Natural Keyboard Pro, rev 1.10/1.11, addr 3, iclass 3/0
ums0: Microsoft Microsoft Wheel Mouse Optical\M-., rev 1.10/1.21, addr 4, iclass 3/1
ums0: 3 buttons and Z dir.
pcib2: <PCI to PCI bridge (vendor=1039 device=0001)> at device 2.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <SiS 530/620 SVGA controller> at 0.0
xl0: <3Com 3c900B-TPO Etherlink XL> port 0xd000-0xd07f mem 0xe5a01000-0xe5a0107f irq 11 at device 9.0 on pci0
xl0: Ethernet address: 00:01:02:86:2d:ce
xl0: selecting 10baseT transceiver, half duplex
pci0: <unknown card> (vendor=0x1105, dev=0x8300) at 13.0 irq 10
pci0: <unknown card> (vendor=0x125d, dev=0x1969) at 15.0 irq 12
pci0: <unknown card> (vendor=0x11c1, dev=0x0441) at 17.0 irq 10
pcib1: <SiS 5591 host to AGP bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
usb0: scheduling overrun
usb0: scheduling overrun
ad0: 10300MB <Maxtor 91080D5> [20928/16/63] at ata0-master UDMA33
acd0: DVD-ROM <CREATIVE DVD-ROM DVD6240E> at ata0-slave PIO4
acd1: CDROM <LTN301> at ata1-master PIO4
acd2: CD-RW <R/RW 2x2x24> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s1a
ad0: WRITE command timeout tag=0 serv=0 - resetting
ata0: resetting devices .. done
ad0: WRITE command timeout tag=0 serv=0 - resetting
ata0: resetting devices .. done
ad0: WRITE command timeout tag=0 serv=0 - resetting
ata0: resetting devices .. done
ad0: WRITE command timeout tag=0 serv=0 - resetting
ad0: trying fallback to PIO mode
ata0: resetting devices .. done
> exit

exit

Script done on Thu Dec  4 14:33:55 2003