Well, I realy need help with this ... I had 2 volumes on my system. I have two identical 30Gb hard disk, I made one 25G, and a 3G partiton both, and created a 25G mirror volume, and a 6Gig concatenated volume (used as /usr) from these with vinum. It has operated very vell, since I wanted to install additional 2 drives (both identical 80G) but they already had data on them (they were being operational in another machine as 2x80G stripeset). Problem was .. I think .., that both the new volumeset (2x80), and the old concatenated (2x3) were being used under the same name : vol (/dev/vinum/vol). Furthermore I have a small partition used as root partition /dev/ad0sa1 128Mb on the original system, and the /dev/ad2sa1 128Mb used as swap, so the rest went for the vinum volumes.
When I added the 2 piece of 80G drive and started the system with 4 physical drives in it, I got an error, that all volumes except root partition has errors, and kicked back to single user mode. I fsck-ed the mirror volume (I guess it was wrong :( but maybe not ... I only had one question, and said yes to salvage) After that I wanted to check usr and got IO error. It come to my mind that the old and new volumes may have the same name, so I have removed the 2 \"new\" drives, and had a quick look on vinum list after started with the original 2 drives only and realized the following : 4 drives D d1 state: up /dev/ad0s1d A:3007/3008MB 100% D d3 state: up /dev/ad0s1e A:25428/25429MB 100% D d2 state: up /dev/ad2s1d A:3007/3008MB 100% D d4 state: up /dev/ad2s1e A:0/25429MB 0% D vinumdrive0 state:referenced A:0/0MB D vinumdrive1 state:referenced A:0/0MB D *invalid* state:referenced A:0/0MB 2 volumes V vol state: down Plexes: 1 Size: 149Gb V mirror state: down Plexes: 2 Size: 24Gb 3 plexes P vol.p0 S state: faulty Subdisks: 2 Size: 149G P mirror.p0 C state: faulty Subdisks: 1 Size: 24G P mirorr.p1 C state: faulty Subdisks: 1 Size: 24G 4 subdisks S vol.p0.s0 state: crashed D: vinumdrive0 Size: 74GB S vol.p0.s1 state: crashed D: vinumdrive1 Size: 74Gb S mirror.p0.s0 state: crashed D: *invalid* Size: 24Gb S mirror.p1.s0 state: stale D: d4 Size: 24Gb So vol seems to be complettly wrong, since it can not be containing 74Gb subdisks, since the whole physical disk is 30Gb only. Mirror subdisks size is ok, but mirror is out of sync no doubt, but I have absolutly no exeperience, whith such a situation, so a more experienced, please help. -- _(_)_ (_. o_) F3CZ0 (_,) http://feczo.nmi.rulez.org ( ) __________________________ // // ___________________________________________________________________________________________ Ingyenes Szerver Hosting 2003. december 31-ig! bővebben: http://ad.advert.hu/url.php?u=101 Ingyenes (.hu) domain átregisztrálás + ingyenes fenntartás -> http://freeweb.hu (.hu) domain regisztráció + ingyenes fenntartás: 4.900Ft+Áfa! (2 évre) SMSWEB: keress penzt a latogatoiddal! Garantalt bevetel -> http://freeweb.hu/smswebgyik.fw _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"