"Scott Renna" <[EMAIL PROTECTED]> writes:

> Hello List,
> 
> I am having some difficulty in getting my xl0 and xl1 3com cards to work
> the way I'd like.  I'm running 5.1 Release and I'm basically trying to
> have one interface with no IP address(specifying it as such in
> /etc/rc.conf as ifconfig_xl1="up") And I'd like to have the other(xl0)
> to have an IP address of my Internal Network.  The purpose of this setup
> is to sniff traffic with the interface that has no IP address and allow
> for management and reporting over the interface that has an IP
> associated with the Internal network.
> 
> For some reason, this is just not working for me at all.  I've tried to
> configure via rc.conf and this fails to work.  I've also tried assigning
> an RFC 1918 address to the interface I want sniffing as this traffic
> should not be routable, but it doesn't seem to work. 
> 
> Can anyone make a suggestion?
> 
> Here's what my rc.conf looks like:  
> 
> Hello List,
> 
> I am having some difficulty in getting my xl0 and xl1 3com cards to work
> the way I'd like.  I'm running 5.1 Release and I'm basically trying to
> have one interface with no IP address(specifying it as such in
> /etc/rc.conf as ifconfig_xl1="up") And I'd like to have the other(xl0)
> to have an IP address of my Internal Network.  The purpose of this setup
> is to sniff traffic with the interface that has no IP address and allow
> for management and reporting over the interface that has an IP
> associated with the Internal network.
> 
> Here's the first few lines of my /etc/rc.conf
> 
> defaultrouter="192.168.1.1"
> hostname="charon"
> ifconfig_xl0="inet 192.168.1.6 netmask 255.255.255.0"
> ifconfig_x11="up"
> 
> Will this accomplish what I'm trying to do successfully?

Just checking the obvious:  you have bridging enabled, right?
[As in the "Bridging" chapter of the Handbook.]

-- 
Lowell Gilbert, embedded/networking software engineer, Boston area: 
                resume/CV at http://be-well.ilk.org:8088/~lowell/resume/
                username/password "public"
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to