Hi,
my laptop has an ATI Radeon 9000:
PCI:*(1:0:0) ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000 M9]
I installed FreeBSD 5.2-RC2,
downloaded GATOS drivers
ATI-4.3.0-14.i386.tar.gz
and untared it to /usr.
Then I modified XF86Config to be :
Section "Device"
Identifier "radeon" # "ATI RV250 Lf (M9)" (Chipset = 0x4c66)
Driver "ati"
Option "TVOutput" "NTSC" # ou PAL-M
BusID "PCI:1:0:0"
Screen 0
EndSection
Then started X (with SVideo cable plugged on my TV)
There is nothing on my TV and XFree86.0.log says :
<snip>
(II) RADEON(0): Page flipping disabled
(==) RADEON(0): Write-combining range (0x0,0x1000) was already clear
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) Depth 24 pixmap format is 32 bpp
<snip>
(II) RADEON(0): membase=0xf0000000 memsize=0x04000000 agpSize=0x00000008
(II) RADEON(0): [dri] RADEONDRISAREAInit.
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) RADEON(0): [drm] created "radeon" driver at busid "PCI:1:0:0"
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xc53d5000
(II) RADEON(0): [drm] mapped SAREA 0xc53d5000 to 0x282ec000
(II) RADEON(0): [drm] framebuffer handle = 0xf0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(EE) RADEON(0): [dri] RADEONDRIScreenInit failed because of a version mismatch.
[dri] radeon.o kernel module version is 1.10.0 but version 1.100.0 or newer is
needed.
[dri] Disabling DRI.
<snip>
(II) RADEON(0): VBI data capture is only supported for NTSC Tuner at the moment
(II) RADEON(0): No MM_TABLE found bios_header=0x0114 mm_table=0x0000.
(II) Loading sub module "theatre"
(II) LoadModule: "theatre"
(II) Loading /usr/X11R6/lib/modules/multimedia/theatre_drv.o
(II) Module theatre: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) RADEON(0): Multimedia table is not valid and no forced settings have been
specified
(II) RADEON(0): Skipping i2c and Rage Theatre initialization code.
(WW) RADEON(0): Option "TVOutput" is not used
(II) RADEON(0): Direct rendering disabled
(==) RandR enabled
Symbol fi1236_dump_status from module
/usr/X11R6/lib/modules/drivers/radeon_drv.o is unresolved!
<snip>
The output on the LCD is OK but what do I missed out to have TV-Out feature ?
Thanks for any enlightenments,
Jo
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
