I tried both, even setting NvAgp to "0", but no luck. I also tried to play with ReqAGP to force lower AGP rates, still the problem remains. Of the three cards, the only one which keeps not working is the 5200. I wonder if it is an AGP issue, but even using the Kernel AGP made no difference. Any other idea ? Or someone having that same card + same kernel ? (chipset is via kt400).
Thanks, Luca.
Andrew L. Gould wrote:
On Thursday 08 January 2004 03:21 pm, Luca Gerli wrote:
Hello all,
just installed a new Nvidia GeForce FX 5200 on my pc (freebsd 5.2RC2), and did a "startx" but just got this:
Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Thu Jan 8 22:09:22 2004 (==) Using config file: "/etc/X11/XF86Config" nvidia0: rm_init_adapter() failed! (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! (EE) NVIDIA(0): *** Aborting *** (EE) Screen(s) found, but none have a usable configuration.
Fatal server error: no screens found
/var/log/XFree86.0.log says:
<snip> (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (--) NVIDIA(0): Linear framebuffer at 0xE0000000 (--) NVIDIA(0): MMIO registers at 0xDE000000 (==) NVIDIA(0): Write-combining range (0xde601000,0x1000) was already clear (EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! (EE) NVIDIA(0): *** Aborting *** (II) UnloadModule: "nvidia" (II) UnloadModule: "vgahw" (II) Unloading /usr/X11R6/lib/modules/libvgahw.a (EE) Screen(s) found, but none have a usable configuration. <snip>
My previous setup was based on a GeForce 2 GTS, and X with "nvidia" run without any problem. Also a GeForce 2 MX400 was ok. Now, I had to revert to the "nv" driver (the one included in XFree86) to be able to run X.
Has anyone any clue or advice ?
I did compile nvidia-driver-1.0.4365 with the default options (just a simple "make install) when I had the GeForce 2 GTS installed. Kernel is in its default config (as coming from 5.2RC2).
BTW: card is working ok in M$ and Linux.
Thanks, Luca.
Does your /etc/X11/XF86Config have the "NvAgp" option line in it to determine whether to use the nvidia agp or FreeBSD agp? (This is discussed in the README file.)
Have you tried doing the "make setup" again?
Best of luck,
Andrew Gould
_______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
