Hello Друг( it means friend on russian)

Now I'll try to answer your questions.
I tested my floppy drive in the same way
1. Boot one Operating System
2. Write some data on the floppy disc (usually it is mp3-files or
   jpg-files)
3. Reboot my PC and boot another OS
4. Check data - everything good
5. Format disc and test again in the same way

Also I read and wrote data on my discs on another PC during this term
and didn't have problems

Next question about hardware

 1. Soltek mainboard
   SL-85DIR
   Socket 478 Mainboard
   Intel 845d series
 2. nVidia G-force 4 MX 440 64MB DDR (AGP)
 3. 512MB DDR RAM memory
 4. Creative Sound Blaster Live!5.1
 5. Winmodem ZyXEL Omni 56K PCI (i thinc FreeBSD know nothing about it)
 6. Asus CD-ROM drive 50x IDE
 7. Yamaha 3200 CD-RW drive
 8. Intel Pentium 4 Processor Socket 478
 9. HDD 40 Gb SEAGATE UDMA 7200 BARRACUDA
10. and this floppy drive
I think that's all
My PC is 1.5 years old.
I bought in 24-July-2002
About scsi:
There is no scsi in my computer so floppy drive is not scsi

when I try :
  mount -t msdos /dev/fd0 /mnt
my system displays :
msdosfs : /dev/fd0: No sush file or directory
I can say that there was no time whan this file existed
so i cannot mount floppy

Here is /var/run/dmesg.boot

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE #0: Fri Jan 16 18:39:42 MSK 2004
    root@:/usr/src/sys/i386/compile/NovAD3a
Preloaded elf kernel "/boot/kernel/kernel" at 0xc054a000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc054a26c.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 1817949908 Hz
CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz (1817.95-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4
  
Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory  = 536805376 (511 MB)
avail memory = 515624960 (491 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT INTEL845> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 6 entries at 0xc00f78a0
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast"  frequency 3579545 Hz
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.MDET] (Node 
0xc150ec60), AE_AML_REGION_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node 
0xc150eba0), AE_AML_REGION_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node 
0xc150eba0), AE_AML_REGION_LIMIT
can't fetch resources for \\_SB_.PCI0 - AE_AML_REGION_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.MDET] (Node 
0xc150ec60), AE_AML_REGION_LIMIT
    ACPI-1287: *** Error: Method execution failed [\\_SB_.MEM_._CRS] (Node 
0xc4047960), AE_AML_REGION_LIMIT
    ACPI-0175: *** Error: Method execution failed [\\_SB_.MEM_._CRS] (Node 
0xc4047960), AE_AML_REGION_LIMIT
can't fetch resources for \\_SB_.MEM_ - AE_AML_REGION_LIMIT
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcm0: <Creative EMU10K1> port 0xc800-0xc81f irq 12 at device 3.0 on pci2
pcm0: <SigmaTel STAC9708/11 AC97 Codec>
pci2: <simple comms> at device 4.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0xfc00-0xfc0f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xe800-0xe81f irq 12 at 
device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xec00-0xec1f irq 10 at 
device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
fdc0: cmd 3 failed at out byte 1 of 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: cmd 3 failed at out byte 1 of 3
pmtimer0 on isa0
fdc0: cannot reserve I/O port range (6 ports)
pcic0 at port 0x3e0 iomem 0xd0000-0xd1fff irq 5 on isa0
pcic_attach: attach found no sockets
device_probe_and_attach: pcic0 attach returned 6
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad0: 38166MB <ST340016A> [77545/16/63] at ata0-master UDMA100
acd0: CD-RW <YAMAHA CRW3200E> at ata1-master PIO4
acd1: CDROM <ASUS CD-S500/A> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s3a

That's all.
P.S.
Thank you that you try to help me.

Sunday, January 18, 2004, 7:28:54 PM, you wrote:

f> Hello friend
f> Post the /var/run/dmesg.boot file in your next email, so I can look
f> for problems.
f> Explain how you tested floppy drive using different operating
f> systems.
f> What hardware is in the PC?
f> How old is the PC?
f> Is it pre-Y2K?

f> Is this an scsi floppy drive?


f> Tell me what happens when you try this

f> Login in as root user
f> Put msdos formatted floppy disk in drive
f> Issue this command
f>      mount -t msdos /dev/fd0 /mnt
f>      cd /mnt
f>      ls
f>      cd /root
f>      umount /mnt





f> -----Original Message-----
f> From: [EMAIL PROTECTED]
f> [mailto:[EMAIL PROTECTED] Behalf Of Алексей
f> Дмитриевич
f> Sent: Sunday, January 18, 2004 10:10 AM
f> To: [EMAIL PROTECTED]
f> Subject: Problem with foppy drive

f> Hello ,   Support
f> I used my floppy just now in Ms Windows XP and it works.
f> Also i used it in ASPlinux 7.2 and Linux Mandrake 9.1 (russian)
f> and it worked very good.
f> So what should i do. if it is possible please write as detailly as
f> possible because i know FreeBSD badly (i use it for about 3 weeks)




f> This boot error message general means that your floppy drive is
f> broken.
f> When was the last time you used it?
f> Try to verify that it's in working order by booting an MS/Window
f> system on that PC,
f> or swap that floppy drive with one from some other PC that you can
f> test works first.

f> -----Original Message-----
f> From: [EMAIL PROTECTED]
f> [mailto:[EMAIL PROTECTED] Behalf Of Алексей
f> Дмитриевич
f> Sent: Sunday, January 18, 2004 8:28 AM
f> To: [EMAIL PROTECTED]
f> Subject: FreeBSD support

f> Hello Support,
f> I have a problem my floppy drive does not want to work.
f> when my FreeBSD 5.1 boots I have a message
f> fdc0: cmd 3 faild at out byte 1 of 3
f> and
f> cannot reserve I/O port range (6 port)

f> After logining I cannot use my floppy drive- there is no device
f> file.
f> What should I do?



f> --
f> Best regards,
f>  Alexey                          mailto:[EMAIL PROTECTED]

f> _______________________________________________
f> [EMAIL PROTECTED] mailing list
f> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
f> To unsubscribe, send any mail to
f> "[EMAIL PROTECTED]"

f> __________


f> --
f> Best regards,
f>  Алексей                          mailto:[EMAIL PROTECTED]

f> _______________________________________________
f> [EMAIL PROTECTED] mailing list
f> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
f> To unsubscribe, send any mail to
f> "[EMAIL PROTECTED]"

f> __________

f> www.zakaz.orc.ru - доставка карт связи: ОРЦ (IP-телефония,
f> доступ в Интернет, хостинг), МТС, БИ Плюс




-- 
Best regards,
 Алексей                            mailto:[EMAIL PROTECTED]

_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
  • ... Алексей Дмитриевич
    • ... Алексей Дмитриевич
      • ... fbsd_user
        • ... Алексей Дмитриевич
          • ... Алексей Дмитриевич
            • ... Алексей Дмитриевич

Reply via email to