Hello Bjorn, Monday, January 19, 2004, 11:05:49 PM, you wrote:
>> I have a three ethernet adapter and need to bridge two of them >> (like an Ethernet switch but with firewall) >> But i have a some problem... >> When i enter >> # sysctl net.link.ether.bridge_cfg=lnc0:0,lnc1:0 >> i saw next: >>>> now lnc0 promisc ON if_flags 0xffff8943 bdg_flags 0x5 >>>> now lnc0 promisc ON if_flags 0xffff8943 bdg_flags 0x5 >>>> now lnc1 promisc ON if_flags 0xffff8943 bdg_flags 0x5 >>>> now lnc1 promisc ON if_flags 0xffff8943 bdg_flags 0x5 >>>> now lnc2 promisc ON if_flags 0xffff8943 bdg_flags 0x5 >>>> now lnc2 promisc ON if_flags 0xffff8943 bdg_flags 0x5 >> What is it means? >> When i try ping from net1 to net2 that's don't work... >> Please help, give me advice BE> It means that the network cards are entering promiscous mode, which in BE> turn means it will pick all packets that passes its physical layer and BE> then the bridge code will forward it to the other interface. _however_ BE> lnc2 should not enter promiscous mode if its not a part of the bridge? BE> Post what version you're using and the rest of your sysctl statements for BE> the bridge, also is it the kernel module or compiled in kernel? BE> (Maybe you'll have more luck with this in the freebsd-net list?) BE> hth, BE> Bjorn BE> _______________________________________________ BE> [EMAIL PROTECTED] mailing list BE> http://lists.freebsd.org/mailman/listinfo/freebsd-questions BE> To unsubscribe, send any mail to BE> "[EMAIL PROTECTED]" Hello! I was know about this list from article "How to get best results from the FreeBSD-questions mailing list" which i find on my freeBSD 4.5 RELISE CD, but i don't know about freebsd-net list... Please tell how i can subscribe to it. About bridgin - now it work, i think my misstake was what i'm configure all ethernet adapter... But it worck only if computer in one subnet ,like 192.168.1.2<--->192.168.1.1<--->192.168.1.3 win98 FreeBSD win98 bridge firewall And it is necessary to me setup freebsd like: 192.168.1.2-21<----->192.168.1.1<----->192.168.2.2-5 net1 192.168.2.1 net2 (20 comp. FreeBSD (4 comp. win98) firewall win98/XP) computers from net2 must access net1 shared I was try to forwart all packet from net1 to net2 and from net 2 to net 1 but when i ping a computer it recive packet with field 'from' 192.168.1.255 and it's don't work... I was try to start routed and setup route table, but still don't work... So, maybe, you can tell me how i must to do that correct... Or, maybe, any link with article or howto's... I will be very grateful! -- Best regards, Alex mailto:[EMAIL PROTECTED] _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"