Elsie Rae Bryan wrote:
We are in the design phase for a small business LAN and want to use
FreeBSD as our DSL router/gateway/firewall/DHCP. We need to run a
backbone cable to a second hub in an adjacent building. Rather than
connecting the two hubs via a switch box, can a third NIC be used to
connect the second hub or should the second hub be connected thru the
up-link port on the first hub? We are leaning toward LinkSys products
for all our hardware (nics, adapters, hubs) and would appreciate any
advice on hardware selection.
This is our first eMail, please advise if we aren't following the
appropriate protocol. Thanks eRae
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
The hub in the other building could run off another
NIC. The question would be setting up the routing
between the two; and I'm not gonna embarass myself
on that one, it being Monday and all....
Email seems to be text/plain and wrapped around
80 chars; looks fine to me.
Kevin Kinsey
DaleCo, S.P.
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
