I'm trying to get a realtek 8139 pcmcia network card to work with FreeBSD, it was working nicely with linux using the standard 8139 driver so I'm sure the card is good. I have the rl driver compiled staticly into the kernel, but I'm not sure if this works with pc cards as the device isn't present when the system boots, do I need to remove it and just use the module?
I looked in the /etc/defaults/pccard.conf file and found no references to any realtek drivers, do I need to add one? The following line from pciconf I believe identifies the realtek card, but I'm not sure: [EMAIL PROTECTED]:0:0: class=0x030000 card=0xb18b0e11 chip=0x4c4d1002 rev=0x64 hdr=0x00 Also, is there any program with nicer output like lspci or cardctl ident on linux? I would think there should be some program that can translate those ugly device/vendor ids into nice pretty names. -- I sense much NT in you. NT leads to Bluescreen. Bluescreen leads to downtime. Downtime leads to suffering. NT is the path to the darkside. Powerful Unix is. Public Key: ftp://ftp.tallye.com/pub/lorenl_pubkey.asc Fingerprint: B3B9 D669 69C9 09EC 1BCD 835A FAF3 7A46 E4A3 280C
Description: PGP signature