I'm running FreeBSD 4.9-STABLE on my IBM T23 Thinkpad. USB devices only work if they were connected when the system booted. If I plug in a USB mouse or a USB flash drive after the machine has booted, they don't appear. /var/log/messages doesn't even mention the device being plugged in.

Also, if I put the laptop to sleep any USB devices are gone until I reboot.

I keep trying new 5.x releases, and the USB problem doesn't occour, but I can't use 5.x because my network card (fxp) won't work and "fxp0: device timeout" is the reason.

I'm including my rc.conf, dmesg output and my kernel config. If anyone can provide some insight I'd really appreciate it.


Ken Ebling


ifconfig_fxp0="inet  netmask"




dmesg output:

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-STABLE #7: Sat Feb 28 16:46:25 EST 2004
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/LAPTOP
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Pentium(R) III Mobile CPU 866MHz (865.93-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
real memory = 267845632 (261568K bytes)
avail memory = 256741376 (250724K bytes)
Preloaded elf kernel "kernel" at 0xc03d2000.
netsmb_dev: loaded
Pentium Pro MTRR support enabled
Using $PIR table, 14 entries at 0xc00fdeb0
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82830 host to AGP bridge> mem 0xd0000000-0xdfffffff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=3576)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <S3 model 8c2e graphics accelerator> at 0.0 irq 11
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/13.00, addr 2, iclass 3/1
ums0: 4 buttons and Z dir.
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pcic0: <TI PCI-1420 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 0.0 on pci2
pcic0: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq]
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pcic1: <TI PCI-1420 PCI-CardBus Bridge> mem 0x51000000-0x51000fff irq 5 at device 0.1 on pci2
pcic1: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq]
pccard1: <PC Card 16-bit bus (classic)> on pcic1
pci2: <unknown card> (vendor=0x11c1, dev=0x0449) at 2.0 irq 11
fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x6400-0x643f mem 0xc0200000-0xc0200fff irq 11 at device 8.0 on pci2
fxp0: Ethernet address 00:d0:59:33:0c:53
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ichsmb0: <Intel 82801CA (ICH3) SMBus controller> port 0x1880-0x189f irq 5 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus general purpose I/O> on smbus0
pcm0: <Intel ICH3 (82801CA)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 5 at device 31.5 on pci0
pcm0: <Cirrus Logic CS4299 AC97 Codec>
eisa0: <EISA bus> on motherboard
eisa0: unknown card @[EMAIL PROTECTED] (0x01000000) at slot 1
orm0: <Option ROMs> at iomem 0xc0000-0xcdfff,0xce000-0xcefff,0xcf000-0xcffff,0xdc000 -0xdffff,0xe0000-0xeffff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
ad0: 38154MB <TOSHIBA MK4019GAX> [77520/16/63] at ata0-master UDMA100
acd0: CD-RW <TOSHIBA DVD-ROM SD-R2002> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <TOSHIBA DVD-ROM SD-R2002 1129> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present

Kernel config:

# $FreeBSD: src/sys/i386/conf/LAPTOP,v 2003/12/19 22:52:44 jhb Exp $

machine         i386
cpu             I686_CPU
ident           LAPTOP
maxusers        0

#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols

options         MATH_EMULATE            #Support for x87 emulation
options         INET                    #InterNETworking
options         FFS                     #Berkeley Fast Filesystem
options         FFS_ROOT                #FFS usable as root device [keep this!]
options         SOFTUPDATES             #Enable FFS soft updates support
options         UFS_DIRHASH             #Improve performance on big directories
options         MD_ROOT                 #MD is a potential root device
options         NFS                     #Network Filesystem
options         NFS_ROOT                #NFS usable as root device, NFS required
options         MSDOSFS                 #MSDOS Filesystem
options         CD9660                  #ISO 9660 Filesystem
options         CD9660_ROOT             #CD-ROM usable as root, CD9660 required
options         PROCFS                  #Process filesystem
options         COMPAT_43               #Compatible with BSD 4.3 [KEEP THIS!]
options         SCSI_DELAY=15000        #Delay (in ms) before probing SCSI
options         UCONSOLE                #Allow users to grab the console
options         USERCONFIG              #boot -c editor
options         VISUAL_USERCONFIG       #visual boot -c editor
options         KTRACE                  #ktrace(1) support
options         SYSVSHM                 #SYSV-style shared memory
options         SYSVMSG                 #SYSV-style message queues
options         SYSVSEM                 #SYSV-style semaphores
options         P1003_1B                #Posix P1003_1B real-time extensions
options         ICMP_BANDLIM            #Rate limit bad replies
options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev
options         AHC_REG_PRETTY_PRINT    # Print register bitfields in debug
                                        # output.  Adds ~128k to driver.
options         AHD_REG_PRETTY_PRINT    # Print register bitfields in debug
                                        # output.  Adds ~215k to driver.
options         NETSMB
options         NETSMBCRYPTO
options         LIBMCHAIN
options         LIBICONV
options         PCI_ENABLE_IO_MODES

device          isa
device          eisa
device          pci

# Floppy drives
device          fdc0    at isa? port IO_FD1 irq 6 drq 2
device          fd0     at fdc0 drive 0

# ATA and ATAPI devices
device          ata0    at isa? port IO_WD1 irq 14
device          ata1    at isa? port IO_WD2 irq 15
device          ata
device          atadisk                 # ATA disk drives
device          atapicd                 # ATAPI CDROM drives
device          atapifd                 # ATAPI floppy drives
device          atapist                 # ATAPI tape drives
options         ATA_STATIC_ID           #Static device numbering

# SCSI peripherals
device          scbus           # SCSI bus (required)
device          da              # Direct Access (disks)
device          sa              # Sequential Access (tape etc)
device          cd              # CD
device          pass            # Passthrough device (direct SCSI access)

# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc0 at isa? port IO_KBD
device          atkbd0  at atkbdc? irq 1 flags 0x1
device          psm0    at atkbdc? irq 12

device vga0 at isa?

# syscons is the default console driver, resembling an SCO console
device          sc0     at isa? flags 0x100

device agp # support several AGP chipsets

# Floating point support - do not disable.
device          npx0    at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
device          apm0    at nexus?

# PCCARD (PCMCIA) support
device          card
device          pcic0   at isa? irq 0 port 0x3e0 iomem 0xd0000
device          pcic1   at isa? irq 0 port 0x3e2 iomem 0xd4000 disable

# Serial (COM) ports
device          sio0    at isa? port IO_COM1 flags 0x10 irq 4
device          sio1    at isa? port IO_COM2 irq 3
device          sio2    at isa? disable port IO_COM3 irq 5
device          sio3    at isa? disable port IO_COM4 irq 9

# Parallel port
device          ppc0    at isa? irq 7
device          ppbus           # Parallel port bus (required)
device          lpt             # Printer
device          plip            # TCP/IP over parallel
device          ppi             # Parallel port interface device
#device         vpo             # Requires scbus and da

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device fxp # Intel EtherExpress PRO/100B (82557, 82558)

# Pseudo devices - the number indicates how many units to allocate.
pseudo-device   loop            # Network loopback
pseudo-device   ether           # Ethernet support
pseudo-device   sl      1       # Kernel SLIP
pseudo-device   ppp     1       # Kernel PPP
pseudo-device   tun             # Packet tunnel.
pseudo-device   pty             # Pseudo-ttys (telnet etc)

# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device   bpf             #Berkeley packet filter

# USB support
device          uhci            # UHCI PCI->USB interface
#device         ohci            # OHCI PCI->USB interface
device          usb             # USB Bus (required)
device          ugen            # Generic
device          uhid            # "Human Interface Devices"
device          ukbd            # Keyboard
device          ulpt            # Printer
device          umass           # Disks/Mass storage - Requires scbus and da
device          ums             # Mouse
device          uscanner        # Scanners

device          atapicam
device          smbus
device          ichsmb
device          smb
device          pcm

[EMAIL PROTECTED] mailing list
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to