Good day to you!
 
I have a problem with my raid controler - it picks up fine, but i cannot
see the drive(s) 
Here is some out put that might help - 
 
a# uname -r
4.9-STABLE

a# dmesg | grep atapci
atapci0: <SiI 0680 ATA133 controller> port
0xd000-0xd00f,0xcc00-0xcc03,0xc800-0xc807,0xc400-0xc403,0xc000-0xc007
mem 0xdf000000-0xdf0000ff irq 2 at device 11.0 on pci0
ata2: at 0xc000 on atapci0
ata3: at 0xc800 on atapci0
atapci1: <VIA 8235 ATA133 controller> port 0xe000-0xe00f at device 17.1
on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
 
I also have this:
 
pci0: <unknown card> (vendor=0x1106, dev=0x3059) at 17.5 irq 11 - but im
not sure what card this is.
 
When i go to /stand/sysinstall i only see :
 
Filesystem  1K-blocks    Used   Avail Capacity  Mounted on
/dev/ad0s1a    128990   45564   73108    38%    /
/dev/ad0s1f    257998   17814  219546     8%    /tmp
/dev/ad0s1g  10998570 1344974 8773712    13%    /usr
/dev/ad0s1e    257998    3512  233848     1%    /var
procfs              4       4       0   100%    /proc

the machine has 3 drives - one dedicated to the OS (normal ide) - the
other two are connected to the raid card (pci IDE) - the raid set
completed and is working fine (i would presume) - but i cannot see the
drive(s) in freebsd, so i cannot work with it. Please guys, i need to
get this sorted out and i have no clue how.
 
Thank you in advance for the help - 
 
Regards
 
Winston mailto:winston/at/lka.co.za


 
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to