ns1# dmesg 
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RELEASE #0: Sun Mar 21 23:52:19 EST 2004
    [EMAIL PROTECTED]:/usr/src/sys/compile/MYHOSTING
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 2793012088 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2793.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
  Hyperthreading: 2 logical CPUs
real memory  = 1592979456 (1555644K bytes)
avail memory = 1546452992 (1510208K bytes)
Preloaded elf kernel "kernel" at 0xc037e000.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 12 entries at 0xc00f3d30
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82865G (865G GMCH) SVGA controller> port 0xec00-0xec07 mem
0xffa80000-0xffafffff,0xf0000000-0xf7ffffff irq 11 at device 2.0 on pci0
agp0: detected 16252k stolen memory
agp0: aperture size is 128M
pci0: <UHCI USB controller> at 29.0 irq 11
pci0: <UHCI USB controller> at 29.1 irq 5
pci0: <UHCI USB controller> at 29.2 irq 9
pci0: <UHCI USB controller> at 29.3 irq 11
pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
iir0: <Intel Integrated RAID Controller> mem 0xdeafc000-0xdeafffff irq 10 at
device 0.0 on pci1
fxp0: <Intel 82801BA (D865) Pro/100 VE Ethernet> port 0xcc00-0xcc3f mem
0xff8ef000-0xff8effff irq 3 at device 8.0 on pci1
fxp0: Ethernet address 00:0c:f1:96:ea:d5
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=8086 device=24d0)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 ATA100 controller> port
0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x24d3) at 31.3 irq 12
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acd0: CDROM <SR244W> at ata1-master PIO4
Waiting 15 seconds for SCSI devices to settle
da0 at iir0 bus 2 target 0 lun 0
da0: <IIR Host Drive   #00 > Fixed Direct Access SCSI-2 device 
da0: Tagged Queueing Enabled
da0: 141745MB (290294550 512 byte sectors: 255H 63S/T 18070C)
Mounting root from ufs:/dev/da0s1a

-----Original Message-----
From: Elvedin [mailto:[EMAIL PROTECTED] 
Sent: Monday, March 22, 2004 12:45 AM
To: Jesse A. Coddington
Subject: Re: FreeBSD 4.9 freezes

Jesse A. Coddington wrote:


Recently I purchased the D865GLC motherboard.  The computer has an Intel
D865GLC motherboard, 3 - Crucial 512MB PC3200 DDR, 4 - 75GB Western Digital
Raptors, and an ICP GDT8546RZ SATA Raid card.  I've installed FreeBSD 4.9
and everything works fine for about 15 to 20 minutes and then the system
freezes.  I've tried disabling Hyper Threading thinking that this may be the
problem, but the problem still exists.

Has anyone seen this problem before and if so, is there a solution?  If no
one has seen this problem, I'm open to resolve this issue.

Thank you,
Jesse A. Coddington

[EMAIL PROTECTED] mailing list
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Can you share dmesg or any other related logs? Also, are you running any of
the same programs during the freezes?
Elvedin T. 

[EMAIL PROTECTED] mailing list
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to