Running 4.9-STABLE, CUPS 1.1.19 and I'm trying to get an Epson Photo Stylus 1270 (usb) working with the system and CUPS. So far, no luck. I've walked through the setup for CUPS via http://127.0.0.1:631/. I'm at a loss to figure this out. What am I missing? Here's what I have.

% ls /dev/ulpt*

crw-------  1 root  wheel  113,   0 Mar 23 08:16 /dev/ulpt0
crw-------  1 root  wheel  113,   1 Mar 23 08:16 /dev/ulpt1
crw-------  1 root  wheel  113,   2 Mar 23 08:16 /dev/ulpt2
crw-------  1 root  wheel  113,   3 Mar 23 08:16 /dev/ulpt3
crw-------  1 root  wheel  113,   4 Mar 23 08:16 /dev/ulpt4


% usbdevs -v


Controller /dev/usb0:
addr 1: self powered, config 1, OHCI root hub(0x0000), AMD(0x0000), rev 1.00
port 1 disabled
port 2 disabled
port 3 disabled
port 4 disabled



% usbdevs -f /dev/ulpt0


usbdevs: /dev/ulpt0: Device not configured


My kernel configuration contains the following for usb:


# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da (done)
device ums # Mouse
device uscanner # Scanners



- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Alexander Sendzimir (owner) 802 863 5502 MacTutor: Apple Mac OS X Consulting [EMAIL PROTECTED]

_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to