On Monday, 29 March 2004 at 18:38:20 +0200, Ludo Koren wrote: > > >>> >>> vinum -> l ... >>> D d1 State: up /dev/da1s1e A: 0/15452 MB (0%) >>> D rd1 State: up /dev/da1s1h A: 0/1023 MB (0%) > >> You shouldn't have more than one drive per spindle. > > It has 'historical' reason. I started with vinum, when it was not > possible to mirror root partition (at least I found just document > 'Bootstrapping Vinum: A Foundation for Reliable Servers' by R. A. Van > Valzah in 2001 or 2002 on www.freebsd.org)
There has never been any reason to have more than one drive per module. You're confusing drives and subdisks. >> What you do now depends on the state of the file system. >> Hopefully you still have the original contents. In this case, > > Yes, I have original contents. The volume size is 15GB just as > before. OK. You've seen le's message. >> you could get hold of the version from -CURRENT, which should >> compile with no problems, and try again. It wouldn't do any >> harm to take down one of the plexes so that you can recover if >> something goes wrong. > > Thank you very much for your advice. I'll try it on weekend, because > there is no possible downtime during the working days. Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply or reply to the original recipients. For more information, see http://www.lemis.com/questions.html Note: I discard all HTML mail unseen. Finger [EMAIL PROTECTED] for PGP public key. See complete headers for address and phone numbers.
Description: PGP signature