Hi,

     I have a big problem, FreeBSD+samba running on HP LH4 server being file server.
     Last night, renaming some file and in some command
     line I push "pause/Break" than such kind of error line came,


      "init: can't exec getty `/usr/libexec/getty` for port /dev/ttyv1:No
      souch file or directory"

      then a little bit freezing time I push again any key than it reboot
      at last server never boot in below messages that freezing..

      What Can I do?

      I suppuse some file system deleted :(

      Maybe boot from CD and installtion procees I must choose
       "configure do post install configuration of freebsd"
      Can I rescue file system? or lost of all my data/server?

      or boot floopy can be functional?

      P.S. I must learn function of pause/break key any sense in FreeBSD?


      *******************************************************************

FreeBSD 4.9-STABLE #0: Wed Mar  3 00:02:36 PST 2004
     root [at] :/usr/obj/usr/src/sys/SMP
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (499.15-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x673  Stepping = 3
 
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory  = 536870912 (524288K bytes)
avail memory = 519507968 (507332K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs
  cpu0 (BSP): apic id:  1, version: 0x00040011, at 0xfee00000
  cpu1 (AP):  apic id:  0, version: 0x00040011, at 0xfee00000
  io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0329000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 14 entries at 0xc00fdee0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard
IOAPIC #0 intpin 19 -> irq 2
IOAPIC #0 intpin 17 -> irq 16
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcd0-0xfcdf at device 4.1 
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 4.2 irq 2
Timecounter "PIIX"  frequency 3579545 Hz
chip1: <Intel 82371AB Power management controller> port 0x2180-0x218f at 
device 4.3 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=0960)> at device 7.0 on pci0
IOAPIC #0 intpin 16 -> irq 17
pci1: <PCI bus> on pcib1
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xe800-0xe8ff mem 
0xfebfe000-0xfebfefff irq 17 at device 4.0 on pci1
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
pci1: <unknown card> (vendor=0x1000, dev=0x000c) at 7.0 irq 18
amr0: <LSILogic MegaRAID> mem 0xf0000000-0xf7ffffff irq 16 at device 7.1 
on pci0
amr0: <Integrated HP NetRAID (T5)> Firmware D.02.05, BIOS B.01.04, 16MB RAM
pcib2: <DEC 21152 PCI-PCI bridge> at device 8.0 on pci0
pci2: <PCI bus> on pcib2
fxp0: <Intel 82558 Pro/100 Ethernet> port 0xdce0-0xdcff mem 
0xfe900000-0xfe9fffff,0xefffe000-0xefffefff irq 16 at device 2.0 on pci2
fxp0: Ethernet address 00:90:27:b7:09:76
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x103c, dev=0x10c1) at 11.0
pci0: <Cirrus Logic GD5446 SVGA controller> at 13.0
orm0: <Option ROMs> at iomem 
0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xc8fff,0xc9000-0xc97ff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 
intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
ata0-slave: ATAPI identify retries exceeded
SMP: AP CPU #1 Launched!
acd0: CDROM <CD-532E-B> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 34708MB (71081984 sectors) RAID 5 (optimal)
Mounting root from ufs:/dev/amrd0s1a


 freezing here!

 



"Her development, her freedom, her independence, must come from and through
  herself. First, by asserting herself as a personality, and not as a sex commodity. 
  Second, by refusing the right of anyone over her body; by refusing to bear
  children, unless she wants them, by refusing to be a servant to God, the State, 
society, 
  the husband, the family, etc., by making her life simpler, but deeper and
  richer. That is, by trying to learn the meaning and substance of life in all its
  complexities; by freeing herself from the fear of public opinion and public 
condemnation."
 [Emma Goldman, Anarchism and Other Essays, p. 211] 

Hoscakalin,
 Ülkü                            mailto:[EMAIL PROTECTED]


This e-mail was scanned by Antivirus!
http://www.kssgm.gov.tr
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to