> GEOM doesn't let you write to an active device, except if you set > kern.geom.debugflags=16
Ok no problem, I changed it this way : # sysctl kern.geom.debugflags=16 kern.geom.debugflags: 1 -> 16 But it seems to change *absolutly nothing*... :( >> # mount >> /dev/ar0s1a on / (ufs, local) >> devfs on /dev (devfs, local) >> /dev/ad8s1d on /home (ufs, local, nodev, noexec, nosuid, with quotas, >> soft-updates) >> /dev/ar0s1e on /tmp (ufs, local, nodev, nosuid, soft-updates) >> /dev/ar0s1f on /usr (ufs, local, soft-updates) >> /dev/ar0s1d on /var (ufs, local, noexec, soft-updates) > If ad8 is part of ar0 GEOM will try to keep you from shooting yourself > on the foot. You should take ad8 out of the array first. I don't think so, /dev/ad8 has no problem and is actually in active use. Let me be more precise here: The "system" (/, /tmp, /usr and /var) is mounted on a mirror represented by /dev/ar0 made with /dev/ad4 and /dev/ad6. The "data" (/home) was previously mounted on the device /dev/ar1 which was made with /dev/ad8 and /dev/ad10. Because /dev/ad10 seems to have a problem I made a backup, broke the mirror seen as /dev/ar1 and simply put /home on /dev/ad8 - freshly restored. >> Because the problematic disk is not actually used, I can try some >> commands on it if someone think it may be interesting. > On the hardware side, you should look for some diagnostic tool from the > manufacturer. Ok, thanks. -- -jpeg. _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"