JJB wrote:
First of all you are using an development version of Freebsd which <snip>
I did a bit of tweaking to compile this program (which was for openbsd) .
<snip>
I will post ppp.conf in next mail .(I am currently away from that machine) .
For me ,the problem appears to be in ppp program and not in eciadsl .
Here is ppp.conf :
################################################################# # PPP Sample Configuration File to use with the Speedtouch USB # Written by Francois Rogler <[EMAIL PROTECTED]> # # You will have to fill in : # - <login> # - <password> # - <VPI>.<VCI> as defined by your provider. # Check the file vpivci for some commom values. # `adsl' profile is for the default PPPoA mode # `pppoe' profile is for the bridged PPPoE mode # # $Id: ppp.conf.sample,v 1.5 2003/07/23 03:36:41 rogler Exp $ #################################################################
default: ident user-ppp VERSION (built COMPILATIONDATE) set log Phase Chat IPCP CCP tun command set ifaddr 10.0.0.1/0 10.0.0.2/0
disable pred1 deflate lqr # compression features deny pred1 deflate lqr # line quality reporting disable ipv6 # turn off ipv6 challenge
adsl:
set authname "**************"
set authkey "**************"
set openmode active 3
set device !"/root/eciadsl/eciadsl-usermode-bsd-0.10/pppoeci -v 1 -f /var/log/pppoeci.log -alt 4 -mode LLC_RFC2364"
accept chap
set speed sync
set timeout 0
set redial 15 10000
set dial ""
add default HISADDR
enable dns
pppoe: set authname "[EMAIL PROTECTED]" set authkey "motihari123" set device PPPoE:tap0 set speed sync set timeout 0 set redial 15 10000 set dial set login add default HISADDR enable dns
Will try this and let you know the results.
Try adding this to your ppp.conf disable pred1 deflate lqr # compression features deny pred1 deflate lqr # line quality reporting disable ipv6 # turn off ipv6 challenge
I am getting the same error even after adding these options .
I am posting eciadsl.conf below :
VID1=0f70 PID1=0001 VID2=0915 PID2=0002 MODE=LLC_RFC2364 VCI=32 VPI=1 FIRMWARE=/etc/eciadsl/firmware00.bin SYNCH=/etc/eciadsl/synch07.bin PPPD_USER=************* PPPD_PASSWD=*********** USE_DHCP=no USE_STATICIP=no STATICIP= GATEWAY= MODEM=Other PROVIDER=Other DNS1=202.56.250.5 DNS2=
I know this for sure because as I said in my first mail , I am using the same
As an guide, I would plug an ms/windows box into your DSL modem and see what it says to verify you really need PPPoA.
program on Linux (on the same box with same modem ) to successfully connect
to the provider.
FreeBSD 'user ppp' also has pppoa and pppoe options. Most DSL modems work with pppoe. Read man ppp and the official handbook at http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/pppoa.html
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Niraj Kumar Sent: Tuesday, April 13, 2004 2:57 AM To: [EMAIL PROTECTED] Subject: ppp problems : Modem connection issues on FreeBSD 5.2.1
Hi,
I have a DSL modem with Globespan chipset. I am trying to use eciadsl usemode program ( http://eciadsl.flashtux.org/download.php?lang=en ) on FreeBSD 5.2.1 (AMD Athlon 2600 , A7N8X-VM motherboard).
However , I am getting the following error and ppp connect failed . See the copy/paste from the terminal below :
# ppp -background adsl Working in background mode Using interface: tun0 Child failed (errdead)
After some more digging , I was able to enable logging . (See log below) From whatever I see in the log , I guess the culprit is the line which says : "Too many LCP NAKs sent - abandoning negotiation" . But I don't know how to address this problem . Could anybody please help me on this .
NOTE that I am able to connect to my provider using the 0.8 version of usermode eciadsl program on Linux , on the same machine .
Also , is there any other program which can be used on FreeBSD for this purpose ? FYI , I have to use *ppp over ATM ( PPPoA* == RFC2364 ) for this connection .
If you need any more info , please let me know. thanks Niraj
-----------------ppp.log -----------------------
Apr 8 20:00:53 ppp[638]: tun0: Phase: deflink: Connected! Apr 8 20:00:53 ppp[638]: tun0: Phase: deflink: opening -> dial Apr 8 20:00:53 ppp[638]: tun0: Chat: deflink: Dial attempt 1 of 10000 Apr 8 20:00:53 ppp[638]: tun0: Phase: deflink: dial -> carrier Apr 8 20:00:53 ppp[638]: tun0: Phase: deflink: carrier -> login Apr 8 20:00:53 ppp[638]: tun0: Phase: deflink: login -> lcp Apr 8 20:00:58 ppp[638]: tun0: Phase: deflink: Too many LCP NAKs sent - abandoning negotiation Apr 8 20:00:59 ppp[638]: tun0: Phase: deflink: Disconnected! Apr 8 20:00:59 ppp[638]: tun0: Phase: deflink: lcp -> logout Apr 8 20:00:59 ppp[638]: tun0: Phase: deflink: logout -> hangup Apr 8 20:00:59 ppp[638]: tun0: Phase: deflink: Disconnected! Apr 8 20:00:59 ppp[638]: tun0: Phase: deflink: Connect time: 6 secs: 1106 octets in, 558 octets out Apr 8 20:00:59 ppp[638]: tun0: Phase: deflink: 56 packets in, 32 packets out Apr 8 20:00:59 ppp[638]: tun0: Phase: total 277 bytes/sec, peak 35 bytes/sec on Thu Apr 8 20:00:58 2004 Apr 8 20:00:59 ppp[638]: tun0: Phase: deflink: HUPing 640 Apr 8 20:00:59 ppp[638]: tun0: Phase: deflink: hangup -> closed Apr 8 20:00:59 ppp[638]: tun0: Phase: bundle: Dead Apr 8 20:00:59 ppp[638]: tun0: Phase: PPP Terminated (normal). Apr 8 20:00:59 ppp[637]: tun0: Phase: Parent: Child failed (errdead) Apr 8 20:00:59 ppp[638]: tun0: Chat: Parent notified of failure ------------------------------------------------------------------- -----------------------------------
_______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
_______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
