Greetings: I am running bsd 5.2.1 and I installed the nvidia driver from the ports for the follwoing video card.
dmesg nvidia0: <GeForce2 MX 100/200> mem 0xc0000000-0xc7ffffff,0xce000000-0xceffffff irq 5 at device 0.0 on pci1 pciconf results: class=0x030000 card=0x00000000 chip=0x011110de rev=0xb2 hdr=0x00 vendor = 'NVIDIA Corporation' device = 'GeForce2 MX 100/200 (DDR) [NV11DDR]' class = display subclass = VGA The installation went good, the card was recognized. The problem is the resolution doesn't get to my desired setting. .. Section "Monitor" Identifier "Monitor0" VendorName "SUN" ModelName "574" HorizSync 30-70 VertRefresh 50-120 Option "DPMS" EndSection .. Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1152x864" "1024x768" "800x600" "640x480" EndSubSection EndSection Above are my XF86Config settings but all I get is a resolution of 640x480. Is there a way to get a higher resolution with this card? Thanks, Brian _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"