Sorry for not choosing a more specific subject line, I've got no idea what's going on with my system. Please help me to find out.
My problems started a few days ago when I updated security/cfs to version 1.4.1_1. After doing that, clear text access to encrypted directories was no longer possible. #mount -o -U,port=3049,intr,nfsv2 localhost:/null /crypt $ cmkdir new $ cattach new NEW $ ls /crypt/NEW/ --> shell doesn't respond any more; kernel: pid xxx (cfsd), uid yyy: exited on signal 10 I rebuilt world, kernel and cfs using very conservative CFLAGS settings - without any success. Tried the GENERIC kernel - same result. So I downgraded to cfs-1.4.1 which works fine. I notified the cfs maintainer who couldn't reproduce the problem. Yesterday I tried again to upgrade, and it seemed to work. But another problem appeared which apparently doesn't seem to be cfs related. ls(1) crashed when reading a normal directory. I was not able to reproduce this. > ls rescue/fred/txt/ Bus error (core dumped) > ls rescue/fred/txt/ showthread.htm This morning the cfs problem reappeared, I had to downgrade again. I've checked my disks (using the scsi controlers verify disk utility) and memory (memtest86) - everything seems to be ok. Nothing unusual in the logs. Any hints on how to proceed? Thanks a lot in advance. > uname -a FreeBSD liza.hacienda.herti 5.2.1-RELEASE-p5 FreeBSD 5.2.1-RELEASE-p5 #1: Tue May 4 19:27:22 CEST 2004 [EMAIL PROTECTED]:/usr/obj/share/FreeBSD/src/sys/LIZA i386 > dmesg Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE-p5 #1: Tue May 4 19:27:22 CEST 2004 [EMAIL PROTECTED]:/usr/obj/share/FreeBSD/src/sys/LIZA Preloaded elf kernel "/boot/kernel/kernel" at 0xc0767000. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD-K6(tm) 3D+ Processor (400.91-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x591 Stepping = 1 Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX> AMD Features=0x80000800<SYSCALL,3DNow!> real memory = 201326592 (192 MB) avail memory = 190107648 (181 MB) K6-family MTRR support enabled (2 registers) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pcibios: BIOS version 2.10 Using $PIR table, 5 entries at 0xc00fdde0 pcib0: <VIA 82C598MVP (Apollo MVP3) host bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci_cfgintr: 0:18 INTA BIOS irq 10 pci_cfgintr: 0:19 INTA BIOS irq 14 pci_cfgintr: 0:20 INTA BIOS irq 11 agp0: <VIA 82C598 (Apollo MVP3) host to PCI bridge> mem 0xf2000000-0xf3ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 drm0: <ATI Radeon If R250 9000> port 0xc000-0xc0ff mem 0xf1000000-0xf100ffff,0xe0000000-0xefffffff irq 15 at device 0.0 on pci1 info: [drm] AGP at 0xf2000000 32MB info: [drm] Initialized radeon 1.10.0 20020828 on minor 0 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 pci0: <mass storage, ATA> at device 7.1 (no driver attached) sym0: <895> port 0xd800-0xd8ff mem 0xf5000000-0xf5000fff,0xf5001000-0xf50010ff irq 10 at device 18.0 on pci0 sym0: Tekram NVRAM, ID 7, Fast-40, LVD, parity checking pcm0: <Creative CT5880-E> port 0xdc00-0xdc3f irq 14 at device 19.0 on pci0 pcm0: <SigmaTel STAC9708/11 AC97 Codec> de0: <Digital 21040 Ethernet> port 0xe000-0xe07f mem 0xf5002000-0xf500207f irq 11 at device 20.0 on pci0 de0: 21040 [10Mb/s] pass 2.3 de0: address 00:80:c8:0c:93:42 orm0: <Option ROMs> at iomem 0xd0000-0xd1fff,0xc0000-0xccfff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0700> can't assign resources (port) Timecounter "TSC" frequency 400911596 Hz quality 800 Timecounters tick every 10.000 msec Waiting 3 seconds for SCSI devices to settle de0: enabling AUI/BNC port GEOM: create disk cd0 dp=0xc22d8e00 GEOM: create disk cd1 dp=0xc22da600 GEOM: create disk da0 dp=0xc22df850 GEOM: create disk da1 dp=0xc2343450 cd0 at sym0 bus 0 target 2 lun 0 cd0: <TEAC CD-ROM CD-516S 1.0G> Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 8) cd0: Attempt to query device size failed: NOT READY, Medium not present da1 at sym0 bus 0 target 1 lun 0 da1: <FUJITSU MAH3091MP 5207> Fixed Direct Access SCSI-3 device da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled da1: 8715MB (17850264 512 byte sectors: 255H 63S/T 1111C) da0 at sym0 bus 0 target 0 lun 0 da0: <FUJITSU MAH3091MP 5207> Fixed Direct Access SCSI-3 device da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled da0: 8715MB (17850264 512 byte sectors: 255H 63S/T 1111C) cd1 at sym0 bus 0 target 3 lun 0 cd1: <GENERIC CRD-RW2 1.28> Removable CD-ROM SCSI-2 device cd1: 20.000MB/s transfers (20.000MHz, offset 8) cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed Mounting root from ufs:/dev/da0s1a
_______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"