This is posted just for the archives so other people can
find it during a search.

Please take notice that some of the rules may wrap to the
next line in this email.
You must return the wrapped part to the rule above it so it will
work.

Well lets start with the kernel. Both ipfw and ipfilter are
delivered in the sysinstall process as boot time loadable modules,
which means it is not necessary to put any kernel options statements
into the kernel and recompile to get it to function.

As part of ipfilter setup also configurating  ipmon syslog logging.
The
ipfilter rule set will allow lan and gateway pc's to do both active
and passive ftp out to the public internet.

***********************************************

In rc.conf  add these statements.
gateway_enable="YES"
ipfilter_enable="YES"
ipfilter_rules="/etc/ipf.rules"

ipmon_enable="YES"    # Start ip monitor log
ipmon_flags="-Ds"        # D = start as daemon
                                   # s = log to syslog


ipnat_enable="YES"
ipnat_rules="/etc/ipnat.rules"

***********************************************

In syslog.conf

*.notice;authpriv.none;local0.none;mail.crit    /var/log/messages
local0.*        /var/log/security

Note1: local0 is where ipfilter flags option s
(ie log to syslog) writes to.

Note2: added local0.none to messages so ipfilter log records
will not go to messages file also.

***********************************************

In newsyslog.conf

/var/log/security   600  10    100  *     B

says auto rotate log when file fills 100 k disk space.

***********************************************

/etc/ipf.rules

#### Note1: ed0 is the interface name of the Nic card
connected to the public internet.
Replace it with your interface name. ####

#### Note2: this rule set may allow functions out and in which you
may
not have or want, just comment out those statements
or delete them from the file. ####

#### Note3. If you want to run an FTP server on your system that is
accessible from the public internet, you must add the following
rules.
Only active mode remote FTP is allowed as passive mode needs all
the high value port numbers open and this is an major security risk.

# Allow out active FTP data channel
pass out quick on ed0 proto tcp from any to any port = 20 flags S
keep state

# Allow in active FTP control channel
pass in quick on ed0 proto tcp from any to any port = 21 flags S
keep state
#############  End of note3 #################


#################################################################
# For testing only,  Bypasses the rest of the rules or just in or
out
#pass in  log quick on ed0 all
#pass out log quick on ed0 all
#log out quick on ed0 all
#################################################################


#################################################################
# No restrictions on Inside Lan Interface for private network
# Replace dc0 with the nic interface name of your Lan
#################################################################

pass out quick on dc0 all
pass in  quick on dc0 all

#################################################################
# No restrictions on Loopback Interface
#################################################################

pass in  quick on lo0 all
pass out quick on lo0 all

#################################################################
# Interface facing Public internet  (Outbound Section)
# Interrogate session start requests originating from behind the
# firewall on the private network
# or from this gateway server destine for the public internet.
#################################################################

# Allow out access to my ISP's Domain name server.
# x.x.x.x must be the IP address of your ISP's DNS.
# Dup these lines if your ISP has more than one DNS server
# Get the IP addresses from /etc/resolv.conf file
#pass out quick on ed0 proto tcp from any to x.x.x.x port = 53 flags
S keep state
#pass out quick on ed0 proto udp from any to x.x.x.x port = 53 keep
state
pass out log quick on ed0 proto udp from any to any port = 53 keep
state


# Allow out access to my ISP's DHCP server for cable or DSL
networks.
# This rule is not needed for 'user ppp' type connection to the
# public internet, so you can delete this whole group.
# Use the following rule and check log for IP address.
# Then put IP address in commented out rule & delete first rule
pass out quick on ed0 proto udp from any to any port = 67 keep state
#pass out quick on ed0 proto udp from any to x.x.x.x port = 67 keep
state

# Allow out non-secure standard www function
pass out quick on ed0 proto tcp from any to any port = 80 flags S
keep state

# Allow out secure www function https over TLS SSL
pass out quick on ed0 proto tcp from any to any port = 443 flags S
keep state

# Allow out send & get email function
pass out quick on ed0 proto tcp from any to any port = 25  flags S
keep state
pass out quick on ed0 proto tcp from any to any port = 110 flags S
keep state

# Allow out Time
pass out quick on ed0 proto tcp from any to any port = 37 flags S
keep state

# Allow out nntp news
pass out quick on ed0 proto tcp from any to any port = 119 flags S
keep state

# Allow out gateway & LAN users non-secure passive & active modes
FTP
# This function uses the IPNAT built in FTP proxy function coded in
# the nat rules file to make this single rule function correctly.
# If you want to use the pkg_add command to install application
packages
# on your gateway system you need this rule.
pass out quick on ed0 proto tcp from any to any port = 21 flags S
keep state

# Allow out secure FTP, Telnet, and SCP
# This function is using SSH  (secure shell)
pass out quick on ed0 proto tcp from any to any port = 22 flags S
keep state

# Allow out non-secure Telnet
pass out quick on ed0 proto tcp from any to any port = 23 flags S
keep state

# Allow out FBSD CVSUP function
pass out quick on ed0 proto tcp from any to any port = 5999 flags S
keep state

# Allow out all icmp to public Internet
pass out quick on ed0 proto icmp from any to any keep state

# Allow out all ident to public Internet
#block out quick on ed0 proto tcp from any to any port = 113

# Allow out whois for LAN PC to public Internet
pass out quick on ed0 proto tcp from any to any port = 43 flags S
keep state

# block ports that show on log and are ok to stop logging
# Deny tcp port 81 - hosts2 name server.  winme is doing this.
block out quick on ed0 proto tcp from any to any port = 81

# Block and log only the first occurrence of everything
# else that's trying to get out.
# This rule enforces the block all by default logic.
block out log first quick on ed0 all


#################################################################
# Interface facing Public internet  (Inbound Section)
# Interrogate packets originating from the public internet
# destine for this gateway server or the private network.
#################################################################

# Block all inbound traffic from non-routable or reserved address
spaces
block in quick on ed0 from 192.168.0.0/16  to any  #RFC 1918 private
IP
block in quick on ed0 from 172.16.0.0/12    to any  #RFC 1918
private IP
block in quick on ed0 from 10.0.0.0/8          to any  #RFC 1918
private IP
block in quick on ed0 from 127.0.0.0/8        to any  #loopback
block in quick on ed0 from 0.0.0.0/8           to any  #loopback
block in quick on ed0 from 169.254.0.0/16  to any  #DHCP auto-config
block in quick on ed0 from 192.0.2.0/24      to any  #reserved for
doc's
block in quick on ed0 from 204.152.64.0/23 to any  #Sun cluster
interconnect
block in quick on ed0 from 224.0.0.0/3        to any  #Class D & E
multicast


##### Block a bunch of different nasty things. ############
# That I don't want to see in the log
# Block frags
block in quick on ed0 all with frags

# Block short tcp packets
block in quick on ed0 proto tcp all with short

# block source routed packets
block in quick on ed0 all with opt lsrr
block in quick on ed0 all with opt ssrr

# Block nmap OS fingerprint attempts
# Log first occurrence of these so I can get their IP address
block in log first quick on ed0 proto tcp from any to any flags FUP

# Block anything with special options
block in quick on ed0 all with ipopts

# Block public pings
block in quick on ed0 proto icmp all icmp-type 8

# Block ident
block in quick on ed0 proto tcp from any to any port = 113

# Block all Netbios service. 137=name, 138=datagram, 139=session
# Netbios is MS/Windows sharing services.
# Block MS/Windows hosts2 name server requests 81
block in log first quick on ed0 proto tcp/udp from any to any port =
137
block in log first quick on ed0 proto tcp/udp from any to any port =
138
block in log first quick on ed0 proto tcp/udp from any to any port =
139
block in log first quick on ed0 proto tcp/udp from any to any port =
81

# Allow traffic in from ISP's DHCP server. This rule must contain
# the IP address of your ISP's DHCP server as it's the only
# authorized source to send this packet type. Only necessary for
# cable or DSL configurations. This rule is not needed for
# 'user ppp' type connection to the public internet.
# This is the same IP address you captured and
# used in the outbound section.
pass in quick on ed0 proto udp from x.x.x.x to any port = 68 keep
state

# Allow in standard www function because I have apache server
pass in quick on ed0 proto tcp from any to any port = 80 flags S
keep state

# Allow in non-secure Telnet session from public Internet
# labeled non-secure because ID & PW are passed over public internet
# as clear text.
# Delete this sample group if you do not have telnet server enabled.
pass in quick on ed0 proto tcp from any to any port = 23 flags S
keep state

# Allow in secure FTP, Telnet, and SCP from public Internet
# This function is using SSH  (secure shell)
#pass in quick on ed0 proto tcp from any to any port = 22 flags S
keep state

# Allow in email SMTP  from public Internet if commercial user
pass in quick on ed0 proto tcp from any to any port = 25 flags S
keep state

# Block and log only first occurrence of all remaining traffic
# coming into the firewall. The logging of only the first
# occurrence stops an 'denial of service' attack targeted
# at filling up your log file space.
# This rule enforces the block all by default logic.
block in log first quick on ed0 all

***********************************************

/etc/ipnat.rules

# Provide special NAT services for FTP from LAN users.
map ed0 10.0.10.0/29 -> 0/32 proxy port 21 ftp/tcp

# Provide special NAT services for FTP from gateway system.
map ed0 0.0.0.0/0 -> 0/32 proxy port 21 ftp/tcp

# Provide Normal NAT services for LAN users.
# NAT my private LAN ip address to what every my ISP address is
map ed0 10.0.10.0/29 -> 0/32


Note: 10.0.10.0/29 is the private ip address range you assigned to
your LAN. Ed0 is the nic interface name facing the public internet.



_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to