I am trying to build a router based on the following components:
1.ADSL Pci card
2.FreeBSD 5.2.1
3.IPFilter

The card gets configured by the driver, and I am able to connect the ADSL
link, but I can't get authenticated to my ISP.  I am trying to use a
spppcontrol script to negotiate the connection manually.  So, after I
start the ADSL card service I run the script, but it doesn't seem to do
anything.  Here is the script, and the response I get when I execute it:

]# cat sppp.sh
 #!/bin/sh

    #--------------------------------------

    #       ppp example setup

    #       last edit-date: [Tue May  4 21:18:13 2004 ]

    #--------------------------------------



    echo "Enable Debug for wpaadsl0:"

    ifconfig wpaadsl0 debug

    echo "--------------------"

    echo ""

    echo "setting PPP options"

    spppcontrol wpaadsl0 disable-ipv6

    spppcontrol wpaadsl0 myauthproto=pap

    spppcontrol wpaadsl0 [EMAIL PROTECTED]

    spppcontrol wpaadsl0 myauthsecret=xxxxxx


    echo ""

    echo "finished"
[EMAIL PROTECTED] ~]# ./sppp.sh
Enable Debug for wpaadsl0:
--------------------

setting PPP options

finished
-----------------------------------------------------------------------------------

The following is from /var/log/messages:

May  5 12:58:54 duron kernel: WANPIPE Hardware Support Module v2.7.2 (c)
1995-2002 Sangoma Technologies Corp.
May  5 12:58:54 duron kernel: WANPIPE(tm) Multiprotocol Driver v2.7.2 (c)
1995-2001 Sangoma Technologies Inc.
May  5 12:58:54 duron kernel: wanpipe: S518 PCI ADSL card found, cpu(s) 1,
bus #0, slot #11, irq #3
May  5 12:58:54 duron kernel: WANPIPE: Allocating maximum 1 devices:
May  5 12:58:54 duron kernel: WANPIPE: wanpipe1-wanpipe1.
May  5 12:58:54 duron kernel: Processing WAN device wanpipe1...
May  5 12:58:54 duron kernel: wanpipe1: Locating: ADSL card, CPU ,
PciSlot=11, PciBus=0
May  5 12:58:54 duron kernel: wanpipe1: Found: ADSL card, CPU ,
PciSlot=11, PciBus=0
May  5 12:58:54 duron kernel: wanpipe1: Starting hardware setup...
May  5 12:58:54 duron kernel: wanpipe1: ADSL PCI memory at 0xcffb0000
May  5 12:58:54 duron kernel: wanpipe1: IRQ 3 allocated to the ADSL card
May  5 12:58:54 duron kernel: wanpipe1: Set interrupt handler...
May  5 12:58:54 duron kernel: wanpipe1: Starting ADSL device.
May  5 12:58:54 duron kernel: wanpipe1: Initializing S518 ADSL card...
May  5 12:58:54 duron kernel: wanpipe1: Initializing LAN Interface
May  5 12:58:54 duron kernel: wanpipe1: Enabling ADSL (ATM OAM) Watchdog
May  5 12:58:54 duron kernel: wanpipe1: ADSL HW Addr: 00:77:77:77:78:e6
May  5 12:58:54 duron kernel: wanpipe1: Creating new WAN interface
wpaadsl0...
May  5 12:58:54 duron kernel: wanpipe1: Configuring Interface: wpaadsl0
May  5 12:58:54 duron kernel: wanpipe1: ATM configured for PPP (VC) over
ATM
May  5 12:58:54 duron kernel: wanpipe1: ADSL Link connecting...
May  5 12:58:54 duron kernel: wanpipe1: Attaching SPPP protocol
May  5 12:58:54 duron kernel: wanpipe1: Attaching network interface
wpaadsl0...
May  5 12:59:22 duron kernel: wanpipe1: Cell Delination successful
May  5 12:59:22 duron kernel: wanpipe1: GP_LINK_UP, State Trained
May  5 12:59:22 duron kernel: wanpipe1: ADSL Link connected (Down 1856
kbps, Up 128 kbps)
May  5 12:59:30 duron kernel: wanpipe1: Link connected!
May  5 12:59:32 duron kernel: wanpipe1: Network device is not UP!
May  5 12:59:42 duron kernel: wanpipe1: Network device is not UP!
----------------------------------------------------------------------------------------

Not sure what to do now, any advice would be really appreciated.  Thanks
in advance.

Andy



_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to